Export DXF.

hi what was your actual concern do you want to take all the layer in dxf at once

Hai gowtham thanks for your reply it actually takes much time for taking again and again if it once means very easy  thats why if it possible can you please say how to do.

The 'DXF.il' code posted by vimaldevlpr 5 years ago should do what you want...

could you please help a code for import all DXF file into another board a quickly?

thanks

Please help me how to save that .il file and execute the code. Please please…….

Save the following skill code into the file 'DXF.il'

procedure( DXF()

  let((l_cnvFiles DesignName f p LayerStr cmd)

    l_cnvFiles = nil
    designName = axlCurrentDesign()
    foreach(filmName axlGetParam("artwork")->groupMembers
        f = strcat("DXF_" filmName)
        p = axlDMOpenFile("ALLEGRO_CNV" f "w")
        fprintf(p "#This is the Layer Conversion File used for\n")
        fprintf(p "#importing DXF data into Allegro/APD.\n\n")
        fprintf(p "#CLASS!SUBCLASS!DXF_LAYER!\n\n")
        foreach(layer axlGetParam(strcat("artwork:" filmName))->groupMembers
            layerStr = parseString(layer "/")
            fprintf(p "%s!\n%s!%s!\n\n" car(layerStr) cadr(layerStr) strcat(car(layerStr) "_" cadr(layerStr)))
        )
        fprintf(p "#END\n")
        push(get_filename(p) l_cnvFiles)
        axlDMClose(p)
        sprintf(cmd "a2dxf -$ -u MM -a 3 -f 12 -c L \"%s.cnv\" \"%s/%s_%s.dxf\" %%s" f getWorkingDir() designName filmName)
        axlRunBatchDBProgram("Creating DXF File" cmd ?warnProgram t ?noExitMsgs t)
    )
    errset(mapcar('deleteFile l_cnvFiles) t)

 )
)
axlCmdRegister("DXF" 'DXF)

then in Allegro at the 'command>' prompt enter the following:

skill load 'DXF.il'

DXF

Opps, change the the registered command name from 'DXF' to 'ART_DXF' as it breaks the original 'dxf in' and 'dxf out' commands

Opps, change the the registered command name from 'DXF' to 'ART_DXF' as it breaks the original 'dxf in' and 'dxf out' commands

THANKYOU. EVERYTHING HAS BEEN EXECUTED PROPERLY, BUT THE DXF FILE IS NOT OPENING.

I used the wrong quote in the skill load statement, please replace it with:

skill load "DXF.il"

s

Thankyou so much for the help david. Everything is working fine with code.

Also I have used createDir() in that provided code to create subfolder. Subfolder got created but the dxf files which are generating are not saving in that subfolder.

Do I need to write any code for this? Please help

I made a simple change to the skill code to write the dxf files to the outputs folder:

C:\Temp>diff dxf.bak dxf.il
18c18,19
< sprintf(cmd "a2dxf -$ -u MM -a 3 -f 12 -c L \"%s.cnv\" \"%s/%s_%s.dxf\" %%s" f getWorkingDir() designName filmName)
---
> createDir("outputs")
> sprintf(cmd "a2dxf -$ -u MM -a 3 -f 12 -c L \"%s.cnv\" \"%s/outputs/%s_%s.dxf\" %%s" f getWorkingDir() designName filmName)