Stats

  • Replies 4
  • Subscribers 161
  • Views 13678
  • Members are here 0
More Content

Unrouted net

KobiC

Hi,

Among the components in my layout, I have a transformer and an electrolytic capacitor (see picture).

All the nets are routed, except this one. I've tried to think about everything - but for some reason, Allegro insist to keep them unrouted.

In layer #2 (Power), colored in yellow, there is a shape that covers them both, incluting thermal releif. It seems that they must be routed: both pins and shape in the same net name.

I have also checked the padstack of those 2 pins - both are defined well to all the layers.

At the top layer (green), the transformer pin also connected to SMT capacitors - very well.

What do you think?

Parents

  • Try a Database Check first and see if that help. I'd also check all the connections on the net to make sure somewhere else on the board isn't missing a connection. If that doesn't help the padstacks and vias need to checked to make sure they are plated through holes and have pads on the relevant layers. 

Reply

  • Try a Database Check first and see if that help. I'd also check all the connections on the net to make sure somewhere else on the board isn't missing a connection. If that doesn't help the padstacks and vias need to checked to make sure they are plated through holes and have pads on the relevant layers. 

Children
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.