Converting Via into DXF marked circle

if u have a conversion tool, u can first change the lines to shapes and then change the shapes to padstacks.

if u do not have the conversion tool, u can try this skill

u can download the zip file.

https://community.cadence.com/cadence_technology_forums/f/pcb-skill/7407/axlskill-function-to-convert-a-cline-to-a-shape

for the shape to padstack conversion, u can type the following in the command line

shape to padstack

Hi masa,

i convert DXF circle into Shape in Allegro shape-->compose shape. I want to conver this shape  into pad stack or via

i do not have a skill to convert a shape to a padstack

what happened when u type in the following comand in the command line?

shape to padstack

...

Which license you are using. i am working  on 17.2 with High speed license

Which license you are using. i am working  on 17.2 with High speed license

u can try these to see if this works or not.

https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000002JjbZEAS&pageName=ArticleContent

https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000007MXnYEAW&pageName=ArticleContent

https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1O0V000007MoU0UAK&pageName=ArticleContent

https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1O0V0000091CjzUAE&pageName=ArticleContent

if nothing works, u might want to place vias manually after figuring out the xy location of the vias on the dxf file as it has got only 30 vias.

Thanks Masa. I believe  we need separate license > thanks let me try to do  in manuall. but i have 2000 vias

after figuring out the xy locations, u may be able to place vias using this skill.

https://support.cadence.com/apex/ArticleAttachmentPortal?id=a1Od0000000nbSNEAY&pageName=ArticleContent