Updating shape

Question

Hello 
 
 Is it possible to update the segments of a shape so that they match the current shape? For example, in the photo below, the segment in green would match the shape in red (doing this arc segment automatically) :

Thanks

techiecs · Answer

You can try the below steps using Shape>Edit Boundary command to change the corners to arcs- 
 1 Select Shape>Edit Boundary. 2 Click LMB on the shape to edit. 3 Under the Options tab, change the Segment Type to Arc. 4 Click the LMB on the start point for the arc along the boundary edge (an arc point will be attached to the cursor). 5 Select and stretch the arc to finish line of the other segment. If required, use RMB and select Flip Dynamics to change the arc direction. 6 Click RMB and select Done to finish the current operation. 
 Give it a try and let me know how it goes for you after performing the steps.

steve · Answer

Try the Edit - ZCopy command. Works like an offset command. look at the Options pane and set the layers you want to copy to, set the contract / expand amount to offset then select the shape you want to copy from.

Stats

Updating shape

Community Guidelines