Stats

More Content

Cmgr configuration for NPT to via hole distance

bdc66a938f164d

I want the DRC to flag when this red distance is below some value:

Is this possible?

Parents
  • steve
    0

    Yes - use the Manufacturing tab and look at Design For Fabrication - Copper Spacing. There is an option to drive a rule from a Non Plated Hole to different objects. If you have an Allegro X Venture license this has much more configuration for type of non plated hole to object type (like via). If you don't then the options are more limited but should still give you a DRC (you'll just get more DRC's).

Reply
  • steve
    0

    Yes - use the Manufacturing tab and look at Design For Fabrication - Copper Spacing. There is an option to drive a rule from a Non Plated Hole to different objects. If you have an Allegro X Venture license this has much more configuration for type of non plated hole to object type (like via). If you don't then the options are more limited but should still give you a DRC (you'll just get more DRC's).

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.