I wanted to create a void or Connect with shape

Question

Hello, 
 I would be thankful if someone can help me in this manner. 
 I wanted to create a cline to connect the hole with the shape where there are DRC of Constraint: Drill Hole to Shape Same Net Spacing and there are lots of DRCS on each layer other solution is that if any of you can help in creating a void on holes. 
 I have attached a snap for reference. 
 Thanks

eDave · Answer

I'm not sure exactly what you want here and what the "holes" are. If they are vias with a pad on the same layer then something like this could work: 
 drcs = setof(drc, axlDBGetDesign() ->drcs, drc ->name == "Drill Hole to Shape Same Net Spacing" foreach(drc, drcs via = car(setof(v, drc ->violations, v ->objType == "via")) shp = car(setof(v, drc ->violations, v ->objType == "shape")) gap = axlAirGap(via, shp, nil, 'enhanced) loc1 = via ->xy loc2 = if(car(parseString(gap ->layer1, "/")) == "VIA CLASS" then gap ->location2 else gap ->location1) subclass = cadr(parseString(drc ->layer, "/")) pad = axlDBGetPad(via, strcat("VIA CLASS/", subclass), "REGULAR") seg = axlPathGetLastPathSeg(car(pad ->figure)) width = 2 * axlDistance(axlPathSegGetEndPoint(seg), axlPathSegGetArcCenter(seg)) path = axlPathStart(list(loc1, loc2), width) axlDBCreatePath(path, strcat("ETCH/", subclass), via ->net) )

Stats

I wanted to create a void or Connect with shape

Community Guidelines