Stats

  • Locked Locked
  • Replies 11
  • Subscribers 167
  • Views 25908
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allegro pin Assignment

NigelFlet
Hi - Very new pcb editor user here

Please can you help.

I am trying to add extra pins to a footprint which currently has 24 pins and want to increase to 26 pins.

I would like to rename pin numbers on this footprint?

I believe I use options tab but not sure how to go further?

Regards,

Nigel
Parents
  • NigelFlet
    Hi Jacob.

    Firstly you need to go and setup the Photoplot width for the text sizes in Setup>Design Parameters, Text tab, “Setup Text Sizes”. You will see many different Text BLk which you can edit (so just change on and try different combinations),

     Then return to main screen and change text size as follows:

     Edit>Change   /  In Find Tab select Text  / In options Tab select class= Ref Des and subclass=Silkscreen Top.

    Then just select text Blk required and just click onref des you want to change.

     
    (once happy just right click done).

     Nigel.
Reply
  • NigelFlet
    Hi Jacob.

    Firstly you need to go and setup the Photoplot width for the text sizes in Setup>Design Parameters, Text tab, “Setup Text Sizes”. You will see many different Text BLk which you can edit (so just change on and try different combinations),

     Then return to main screen and change text size as follows:

     Edit>Change   /  In Find Tab select Text  / In options Tab select class= Ref Des and subclass=Silkscreen Top.

    Then just select text Blk required and just click onref des you want to change.

     
    (once happy just right click done).

     Nigel.
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.