Stats

  • Locked Locked
  • Replies 3
  • Subscribers 165
  • Views 13522
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Method of manually assigning connectivity within the PCB Editor?

KerryMurphy

All:

 I'm using V15.2 of Cadence, and from all I've looked through there doesn't seem to be a method to manually assign connectivity to parts you would load from a library into the PCB editor. Having used other tools previously [only using Cadence now since 11/08] there was always a method of doing this task. I figure if you can load parts w/o a netlist packaged from the schematic then you can add connectivity as well. Is this tool capable of this? Maybe available in newer revs possibly? Thanks in advance for your assistance to this Cadence newbie :).

Parents
  • Randy R

    See if this works:

    1) Setup->User Preferences->Misc and check the box for "logic_edit_enabled"

    2) Logic->Net Logic

Reply
  • Randy R

    See if this works:

    1) Setup->User Preferences->Misc and check the box for "logic_edit_enabled"

    2) Logic->Net Logic

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.