Stats

  • Locked Locked
  • Replies 5
  • Subscribers 164
  • Views 13713
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Shape fill DRC errors

archive

 I have an 8 layer design that has drc errors after updating the shapes.  For some reason, the clearance rules are not being followed in some areas.  This seems to be random.  I did a database check but that did not help.  

 Any ideas??

Parents
  • oldmouldy

    First thing to check is that the layers are positive and the shapes are all dynamic and connected to the required nets.

    Then go to Display>Status and see if there are any out of date shapes, left-click on the coloured button to the left of the status to get a report of the shapes.

Reply
  • oldmouldy

    First thing to check is that the layers are positive and the shapes are all dynamic and connected to the required nets.

    Then go to Display>Status and see if there are any out of date shapes, left-click on the coloured button to the left of the status to get a report of the shapes.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.