Stats

  • Locked Locked
  • Replies 2
  • Subscribers 165
  • Views 13327
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error [ALG0013] in Capture CIS 16.2

XpertDesigner

hi All,

While generating netlist from Orcad Capture CIS16.2, following error is occured. Please help how it can be resolve

thanks in advance

#1 Error   [ALG0013] Conflicting values of following Component Definition properties found on 1C106 and 1C10 for part "0603C".
              VALUE
#2 Error   [ALG0013] Conflicting values of following Component Definition properties found on 1C107 and 1C102 for part "0402C".
              VALUE
#3 Error   [ALG0013] Conflicting values of following Component Definition properties found on 1C108 and 1C102 for part "0402C".
              VALUE

Parents
  • Michael Huawei

    PCR 402087 DEVICE property in Capture version 14.0 and later

    Description: The DEVICE property that was used in previous releases, is used differently in Capture 14.0 and later. However, the existence of this property in your design library can cause problems with the Capture-Allegro interface.

    Solution: In cases where your design library includes the DEVICE property (an anachronism from previous releases), you can avoid having to remove the property from each part in your library by employing the IGNORE_PROP property. To ignore the DEVICE property on a complete design, define IGNORE_PROPR as an environmental/system variable and assign it a value of "DEVICE."

    As with all environmental variables, IGNORE_PROP is specific to a system login. You must have administrative privileges to define IGNORE_PROP as a system variable. Also, you must restart Capture in order to read the new variable settings.

Reply
  • Michael Huawei

    PCR 402087 DEVICE property in Capture version 14.0 and later

    Description: The DEVICE property that was used in previous releases, is used differently in Capture 14.0 and later. However, the existence of this property in your design library can cause problems with the Capture-Allegro interface.

    Solution: In cases where your design library includes the DEVICE property (an anachronism from previous releases), you can avoid having to remove the property from each part in your library by employing the IGNORE_PROP property. To ignore the DEVICE property on a complete design, define IGNORE_PROPR as an environmental/system variable and assign it a value of "DEVICE."

    As with all environmental variables, IGNORE_PROP is specific to a system login. You must have administrative privileges to define IGNORE_PROP as a system variable. Also, you must restart Capture in order to read the new variable settings.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.