Stats

  • Locked Locked
  • Replies 6
  • Subscribers 167
  • Views 17494
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Allegro Free Physical PCB viewer 16.5 problem

LeonidSjm

Hi,

I installed Allegro Free Physical viewer ver 16.5, but i can't see the menu bar on the top of the program.

All previous versions are work (16.2, 15.2).

What can be the problem?

I tried to reinstall several times, but it doesn;t help. It work on the other PC so the problem is with the PC but i don't know what.

Thanks

Leonid

 

Parents

  • I think I know what's going on, though I don't know how to fix it.  I also use some software from PTC that installs the EXTRACTA piece of Cadence to allow their Intercomm program to load Cadence files.  It's creating a directory structure and taking over the various variables that are being used in the viewer (and are potentially the same problems I'm having with the more global Allegro suite).

     

    So almost everything pulled up by set in the command area reflects that structure, and not where the Free_Viewer install actually is, so it's indeed not finding things correctly.

    I'm not sure where it's pulling  the path from -- a Registry Entry as there aren't any environmental variables in Windows that have this path set that way.

     I'm guessing that PTC changed something about their approach (or Cadence did) after 16.2, as they played together well up until that point.  Even though the PTC code was installed first, a fresh Free Viewer install still is looking within that path structure for the menu.

     

    | Update:  Copying the CUIMENU's directory to the PTC installation location fixes the Viewer Menu's problem...

Reply

  • I think I know what's going on, though I don't know how to fix it.  I also use some software from PTC that installs the EXTRACTA piece of Cadence to allow their Intercomm program to load Cadence files.  It's creating a directory structure and taking over the various variables that are being used in the viewer (and are potentially the same problems I'm having with the more global Allegro suite).

     

    So almost everything pulled up by set in the command area reflects that structure, and not where the Free_Viewer install actually is, so it's indeed not finding things correctly.

    I'm not sure where it's pulling  the path from -- a Registry Entry as there aren't any environmental variables in Windows that have this path set that way.

     I'm guessing that PTC changed something about their approach (or Cadence did) after 16.2, as they played together well up until that point.  Even though the PTC code was installed first, a fresh Free Viewer install still is looking within that path structure for the menu.

     

    | Update:  Copying the CUIMENU's directory to the PTC installation location fixes the Viewer Menu's problem...

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.