Stats

  • Locked Locked
  • Replies 3
  • Subscribers 166
  • Views 17927
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

netlist aborting

shreeja
Dear all,

when im netlisting my design i had receive the following errors. this is the first time, these errors are came whem i'm netlisting. i dont know why this is came....? and how to correct it. anyone of you know how to correct these error, please tell me that. in this design im using a 48LQFP. most of the error came on that only.
{ Using PSTWRITER 16.5.0 p001Nov-08-2013 at 09:03:56 } #1 ERROR(ORCAP-36046): Conflicting number of parts per package (2) for U8A: SCHEMATIC1, PAGE1 (7.40, 7.90)#2 ERROR(ORCAP-36046): Conflicting number of parts per package (1) for U1: SCHEMATIC1, PAGE1 (3.40, 0.80)#3 ERROR(ORCAP-36036): Multiple pin 8's which have different nets connected for U8: SCHEMATIC1, PAGE1 (7.40, 7.90).Check for incorrect packaging of all devices in U8.#4 ERROR(ORCAP-36036): Multiple pin 2's which have different nets connected for U8: SCHEMATIC1, PAGE1 (7.40, 7.90).Check for incorrect packaging of all devices in U8.#5 ERROR(ORCAP-36036): Multiple pin 3's which have different nets connected for U8: SCHEMATIC1, PAGE1 (7.40, 7.90).Check for incorrect packaging of all devices in U8.#6 ERROR(ORCAP-36036): Multiple pin 1's which have different nets connected for U8: SCHEMATIC1, PAGE1 (7.40, 7.90).Check for incorrect packaging of all devices in U8.#7 ERROR(ORCAP-36036): Multiple pin 16's which have different nets connected for U8: SCHEMATIC1, PAGE1 (7.40, 7.90).Check for incorrect packaging of all devices in U8.#8 ERROR(ORCAP-36035): Multiple pin 1's which have different nets connected for U1: SCHEMATIC1, PAGE1 (3.40, 0.80).#9 ERROR(ORCAP-36035): Multiple pin 2's which have different nets connected for U1: SCHEMATIC1, PAGE1 (3.40, 0.80).#10 ERROR(ORCAP-36035): Multiple pin 3's which have different nets connected for U1: SCHEMATIC1, PAGE1 (3.40, 0.80).#11 ERROR(ORCAP-36018): Aborting Netlisting... Please correct the above errors and retry.

Regards,

srimathi
Parents
  • Hossein1357

    Hi,

    I have the same problem and followed your instructions but it did not work. Again, after doing annotate I receive the same error and I see that there are two pins named AB16?! :-( I don't know how I can overcome with such error? I would appreciate any help.

    Hossein

Reply
  • Hossein1357

    Hi,

    I have the same problem and followed your instructions but it did not work. Again, after doing annotate I receive the same error and I see that there are two pins named AB16?! :-( I don't know how I can overcome with such error? I would appreciate any help.

    Hossein

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.