Stats

  • Locked Locked
  • Replies 5
  • Subscribers 164
  • Views 15318
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Strange questions when generationg Artwork using Allegro 16.6

momo1982

Hi all,

 First, thanks so much for your time spending on my post. I met a pretty strange question when I generate artwork using allegro 16.6. Since I am new to allegro, I will describe my question with enough details and pictures. I would appreciate your kindness if you can give me any help.

 I just finished a simple PCB design and the copper pouring. The next step for me would be generating gerber. I upload the picture of part of the PCB here, and this part is where the problems could be. 

Parents
  • momo1982

    And I also upload the setting of artwork here so that you can see there should be no problem with the setting.

    Btw, I do DRC check ("Update DRC" in "Tool" menu) for the PCB, and there is no error. The DRC sign on the right-down corner is green.

Reply
  • momo1982

    And I also upload the setting of artwork here so that you can see there should be no problem with the setting.

    Btw, I do DRC check ("Update DRC" in "Tool" menu) for the PCB, and there is no error. The DRC sign on the right-down corner is green.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.