Stats

  • Locked Locked
  • Replies 4
  • Subscribers 166
  • Views 18527
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Error during Simulation

Giridharan

Please guide to solve below problem.

I have done many simulation. this is sudden problem.

Session log description

INFO(ORCAP-2191): Creating PSpice Netlist
INFO(ORNET-1041): Writing PSpice Flat Netlist C:\CADENCE\GIRI PROJECT\METRON\6 Parameter\6 Parameter-PSpiceFiles\SCHEMATIC1\SCHEMATIC1.net
INFO(ORNET-1169): Unable to open the property mapping file: devparam.txt. To resolve this problem, ensure that PSpice.ini exists at the correct location. After that check Library Path in simulation settings contains <installation-path>/tools/pspice/library path and then create the netlist again.
INFO(ORNET-1162): Unable to create design property file.

Parents
  • oldmouldy
    It looks like PSpice cannot find the "base" configuration files when the simulator starts, go to PSpice>Edit Simulation Profile, Configuration Files tab, select Library at the upper left of the form, check the Library Path setting at the middle bottom of the form, highlight and delete any current value but it will probably be empty anyway, then use the lower browse button to browse to the "tools\pspice\library" directory of the product installation and add it as the Library Path. Also check that you have "nom.lib", or "nomd.lib" for the unlicensed version, as Global in the configured files section. Then OK the Simulation Profile form.
Reply
  • oldmouldy
    It looks like PSpice cannot find the "base" configuration files when the simulator starts, go to PSpice>Edit Simulation Profile, Configuration Files tab, select Library at the upper left of the form, check the Library Path setting at the middle bottom of the form, highlight and delete any current value but it will probably be empty anyway, then use the lower browse button to browse to the "tools\pspice\library" directory of the product installation and add it as the Library Path. Also check that you have "nom.lib", or "nomd.lib" for the unlicensed version, as Global in the configured files section. Then OK the Simulation Profile form.
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.