Stats

  • Locked Locked
  • Replies 5
  • Subscribers 166
  • Views 2179
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Constraint Manager Doubt - Net Properties

alvjorge

Hello,

working in new design I need to update the netlist from capture. After updating, at CM on PCB Editor some signals are shown with a pink arrow on their left ( ).

What does this arrow means?

KR!

* EDIT: Checking schematic, I have no selected any signal (which could return this behaviour). 

Parents
  • mcatramb91

    Hello,

    An Arrow on the left edge of the Name column indicates that the Net object is Highlighted on the Allegro canvas

    In your image, Net VREG has been highlighted using Display > Highlight

    Color Swatch in Type Column and Arrow on the left edge of the Name column indicate that the Net object is Assigned a color on the Allegro canvas

    In your image, Net SCL and SDA has been assigned a color (White) using Display > Assign Color

    I don't believe this would occur during a netlist import from Capture but maybe something weird occurred.

    Hope this helps,
    Mike Catrambone

Reply
  • mcatramb91

    Hello,

    An Arrow on the left edge of the Name column indicates that the Net object is Highlighted on the Allegro canvas

    In your image, Net VREG has been highlighted using Display > Highlight

    Color Swatch in Type Column and Arrow on the left edge of the Name column indicate that the Net object is Assigned a color on the Allegro canvas

    In your image, Net SCL and SDA has been assigned a color (White) using Display > Assign Color

    I don't believe this would occur during a netlist import from Capture but maybe something weird occurred.

    Hope this helps,
    Mike Catrambone

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.