Stats

  • Locked Locked
  • Replies 4
  • Subscribers 166
  • Views 15622
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Pin name rotate with component

Jeri

Hi, I have a newbie question.

Is there a way to set pin numbers to rotate with the component?

Also is there a way to change the text of net names on pads?

Thanks

Parents
  • steve
    The pin number text rotates as you rotate the part so not sure what your issue is here. Turn on the layer Package Geometry / Pin Number and you can see the pin number text. For the embedded netname, it's driven by the schematic so if the net is called ADDR3 that's what you will see in the pin and cline (track). If you want to change it open the schematic and change it there, then re-import the netlist.
Reply
  • steve
    The pin number text rotates as you rotate the part so not sure what your issue is here. Turn on the layer Package Geometry / Pin Number and you can see the pin number text. For the embedded netname, it's driven by the schematic so if the net is called ADDR3 that's what you will see in the pin and cline (track). If you want to change it open the schematic and change it there, then re-import the netlist.
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.