Stats

  • Locked Locked
  • Replies 10
  • Subscribers 167
  • Views 16838
  • Members are here 0
More Content
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Multiple pins on top of each other

aricbeaver

Hi,


Capture will allow two pins to be on top of each other and will connect both pins in the netlist. Is it generally acceptable to do such a thing? Thisis for the following component: http://www.vishay.com/docs/30099/wsl3637.pdf

Parents
  • redwire

    Even though it works it's generally unacceptable practice.  Just move the pins to the next grid to the side (edit->symbol) and connect them back with a wire on the schematic.  You'll have the same netlist and a clean drawing.

Reply
  • redwire

    Even though it works it's generally unacceptable practice.  Just move the pins to the next grid to the side (edit->symbol) and connect them back with a wire on the schematic.  You'll have the same netlist and a clean drawing.

Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.