Following Cadence Design Systems’ acquisition of the Design & Engineering (D&E) business, the D&E Community Forum on the Nexus Community Center has been migrated in the Cadence Physical System Simulation Community. For more details and if you have any questions, please refer to the FAQ.

Stats

  • State Not Answered
  • Replies 9
  • Subscribers 1
  • Views 2
  • Members are here 0
More Content

How to create jprim in wheel template as in handling_tire.tpl?

jozef.bucha
Hello i am trying to make wheel templte similiar as handling tire. Everything works fine, also jprim I am able to make, but how is this done?
 
Created forces elements ti[lr]_wheel has attached jprim:
 
Object Name : ._handling_tire.til_wheelObject Type : ac_tire
Parent Type : Model
Location : (LOC_RELATIVE_TO({0, 0, 0}, ._handling_tire.ground.origo)) mm, mm, mm
Orientation : (ORI_RELATIVE_TO({0, 0, 0}, ._handling_tire.ground.origo)) deg
 
General Parameters:
property_file (mdids://acar_shared/tires.tbl/mdi_tire01.tir (._handling_tire.til_wheel.property_file_list[._handling_tire.til_wheel.property_file_index]))
property_file_list (mdids://acar_shared/tires.tbl/mdi_tire01.tir)
property_file_index (1)
contact_type (handling)
configuration (single)
outside_tire (no value)
jprim_id (0.0 (._handling_tire.jolper_sse_jprim.adams_id))
center_offset (0.0)
high_performance (0 ("no" == "yes" ? 1 : 0))
 
Input Parameters:
i_marker (._handling_tire.whl_wheel.tire_i)
j_fmarker (._handling_tire.ground.FMA_1)
ref_marker (._handling_tire.ground.til_tire_ref_1)
 
Output Parameters:
None
 
How can I do such thing? I believe answer is in command navigator, but i am not able to find needed command
 
Thanks
 
Jozef
Parents
  • 0
    Yes, about that. If I create wheel part and compare to handling tire template, difference is that in handling tire from acar_shared database info about ti[lr]_wheel from force elements in tree shows
     
    Object Name : ._handling_tire.til_wheelObject Type : ac_tire
    Parent Type : Model
    Location : (LOC_RELATIVE_TO({0, 0, 0}, ._handling_tire.ground.origo)) mm, mm, mm
    Orientation : (ORI_RELATIVE_TO({0, 0, 0}, ._handling_tire.ground.origo)) deg
     
    General Parameters:
    property_file (mdids://acar_shared/tires.tbl/mdi_tire01.tir (._handling_tire.til_wheel.property_file_list[._handling_tire.til_wheel.property_file_index]))
    property_file_list (mdids://acar_shared/tires.tbl/mdi_tire01.tir)
    property_file_index (1)
    contact_type (handling)
    configuration (single)
    outside_tire (no value)
    jprim_id (0.0 (._handling_tire.jolper_sse_jprim.adams_id))
    center_offset (0.0)
     
    The bold line i think is somehow parametrised to jprim that is activated during static analysis and deactivated during dynamic run.
     
    In Adm 740 is tutorial how to create wheel, but without jprim, it only mention that template from acar_shared database has it (jprim) and why it has.
     
    I was looking to old forum, but for several days i can not reach that page.
    Thanks Jozef
Reply
  • 0
    Yes, about that. If I create wheel part and compare to handling tire template, difference is that in handling tire from acar_shared database info about ti[lr]_wheel from force elements in tree shows
     
    Object Name : ._handling_tire.til_wheelObject Type : ac_tire
    Parent Type : Model
    Location : (LOC_RELATIVE_TO({0, 0, 0}, ._handling_tire.ground.origo)) mm, mm, mm
    Orientation : (ORI_RELATIVE_TO({0, 0, 0}, ._handling_tire.ground.origo)) deg
     
    General Parameters:
    property_file (mdids://acar_shared/tires.tbl/mdi_tire01.tir (._handling_tire.til_wheel.property_file_list[._handling_tire.til_wheel.property_file_index]))
    property_file_list (mdids://acar_shared/tires.tbl/mdi_tire01.tir)
    property_file_index (1)
    contact_type (handling)
    configuration (single)
    outside_tire (no value)
    jprim_id (0.0 (._handling_tire.jolper_sse_jprim.adams_id))
    center_offset (0.0)
     
    The bold line i think is somehow parametrised to jprim that is activated during static analysis and deactivated during dynamic run.
     
    In Adm 740 is tutorial how to create wheel, but without jprim, it only mention that template from acar_shared database has it (jprim) and why it has.
     
    I was looking to old forum, but for several days i can not reach that page.
    Thanks Jozef
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.