Stats

State Verified Answer
Replies 7
Subscribers 1
Views 3
Members are here 0

Static equilibrium analysis problem.

I am trying an H-arm Camber link suspension type, but I get an error like this "Static equilibrium analysis has not been successful". I checked the constraints with other templates but I couldn't find mistake I had done. Can someone please help me to sort it out this problem.

Attached Files (4)

Rear_subsystem.sub.zip

trail_1_parallel_travel.msg

_H_arm_suspension.tpl.zip

Rear.asy.zip

Parents

0 Jesper Slattengren over 5 years ago
The wacky thing was that your top mount joint was active only in kinematic mode so it was deactivated by default.

To summarize:

Create a joint between lower strut at H-arm. Spherical is ok if you change the cylindrical joint between lower and upper strut to a translational.

Change the hooke joint at the top of the strut to be always active.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Reject Answer

Cancel

Reply

0 Jesper Slattengren over 5 years ago
The wacky thing was that your top mount joint was active only in kinematic mode so it was deactivated by default.

To summarize:

Create a joint between lower strut at H-arm. Spherical is ok if you change the cylindrical joint between lower and upper strut to a translational.

Change the hooke joint at the top of the strut to be always active.
Cancel
Vote Up 0 Vote Down

Sign in to reply

Reject Answer

Cancel

Children

No Data

Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.