Following Cadence Design Systems’ acquisition of the Design & Engineering (D&E) business, the D&E Community Forum on the Nexus Community Center has been migrated in the Cadence Physical System Simulation Community. For more details and if you have any questions, please refer to the FAQ.

Stats

  • State Not Answered
  • Replies 7
  • Subscribers 3
  • Views 1
  • Members are here 0
More Content

Solver abruptly stopping/refusing to start

jpatterson
Hi,
 
This will be a horribly vague question, but I'm stumped. Here's the situation...
 
  1. Full Tractor-Trailer model in A/View 2021.4.
  2. This model has flex bodies, contacts, tires, etc., and has run successfully for years.
  3. That is until some recent changes that included new flex bodies.
  4. I'm running these with the external solver as I have for years, but this one abruptly stops as soon as the solver tries to start. End of the .msg file below...
 
 Begin Simulation
 
 ****** Performing Dynamic Simulation using Gstiff SI2 Integrator ******
  The system is modelled with SI2 DAEs.
  The integrator is GSTIFF, CORRECTOR = modified
  Integration error =  1.000000E-01
 
No error message, nothing. "debug/eprint" didn't show anything either.
 
I feel like I've seen this in the past, and it's an obvious (and dumb) error/mistake I'm making. I can't for the life of me remember what it is. Here's what I've tried/checked, all to no avail...
 
  1. Recreated the flex bodies.
    1. They work fine in a smaller test model.
  2. Made sure my .rdf files were present.
    1. Also tried different road files.
  3. Made sure my .tir files were present.
  4. Wrote the model out as a .cmd, read it back in to a new database.
    1. Read in with no errors.
  5. Double-checked my memory settings - all set to "huge".
  6. Looked for parts with no mass.
 
I could go back to the previous iteration and redo my changes, but it took a while and I really feel I'm missing something silly.
 
Any vague ideas regarding this vague question?
Parents
  • 0
    Hello jpatterson,
     
    is a msg-file created by Solver?
    If yes, is there a return code or does it stop on a specific point?
    If no, it seems that Solver does not start or crashes directly while reading in the model.
    Did you try to start Solver from a Dos or Linux-Shell?
    adams2021_4 ru-sol filename.acf (Windows)
    You should see something in the Dos-Shell if Solver starts, read in the model, etc.
     
    Hope that helps.
     
    Best regards,
    Karsten
Reply
  • 0
    Hello jpatterson,
     
    is a msg-file created by Solver?
    If yes, is there a return code or does it stop on a specific point?
    If no, it seems that Solver does not start or crashes directly while reading in the model.
    Did you try to start Solver from a Dos or Linux-Shell?
    adams2021_4 ru-sol filename.acf (Windows)
    You should see something in the Dos-Shell if Solver starts, read in the model, etc.
     
    Hope that helps.
     
    Best regards,
    Karsten
Children
No Data
Cadence Guidelines

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.