Stats

  • Replies 4
  • Subscribers 48
  • Views 16292
  • Members are here 0

Help With Capture CIS

Manu85
Hello Everybody, I have a problem using Capture CIS. I tried to simulate a very simple circuit, just a DC source, LM338K and 2 resistors, but it doesn't work :-(. A windows appears and says: "Warning Were reported, check session log". I read de the session log and says this :

Writing PSpice Flat Netlist C:\PSD_Data\Power Supply-PSpiceFiles\SCHEMATIC1\SCHEMATIC1.net WARNING [NET0093] No PSpiceTemplate for U1, ignoring/* PSpice netlist generation complete

I tried in so many ways to make it work, but nothing. Can anyone tell me what I'm doing wrong? Thanks Juan Manuel Ibañez

Parents
  • wukong

    I'm also having difficulty when I try to run a simulation from capture.  When I run a simple circuit with resisters I get a reasonable output in biasis point with a DC Voltage.  When I substitute an  AC source in the circuit for the DC source I get zeros through out the circuit for both node voltages and branch currents.

Reply
  • wukong

    I'm also having difficulty when I try to run a simulation from capture.  When I run a simple circuit with resisters I get a reasonable output in biasis point with a DC Voltage.  When I substitute an  AC source in the circuit for the DC source I get zeros through out the circuit for both node voltages and branch currents.

Children
No Data
CDNS Forum Thread CSS JS
CDNS - Fix Layout