Stats

  • Locked Locked
  • Replies 7
  • Subscribers 125
  • Views 15033
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Configure IC6.1.3.502

lulhs

I installed IC6.1.3502 version, but I still need to do the configure step.

Any one can tell me which packages to configure and how? Is there any tutorials to show that?

 Thanks,

Parents

  •  Hi,

    If you select all the tools, InstallScape will create a shorter list of those that might need configuring; depending on what tools you have installed, it may be 3 or 4 tools that might need configuring.

    Then it depends on what you are using and how you have things set up.  For example, if you are doing Mixed-Signal design, then you might want to configure AMS Designer and give the path to your IUS installation.  Also, you may want to configure licensing, e.g. to start the license daemons automatically after a reboot - it may not be necessary to run this step depending on how your licenses are set up (e.g. I use the CDS_LIC_FILE environment variable, so I don't worry about having a license file in the share/license directory). Finally, you may wish to configure OpenAccess; OA is installed as part of the installation process now (previously you had to configure to get OA installed), so it should be where it is expected to be - but you might be sharing an OA installation across different tool releases, so you might want to configure this manually.

    I suggest you try it out and see what happens.

    Hopefully this helps a little.

    Regards,

    Lawrence.

Reply

  •  Hi,

    If you select all the tools, InstallScape will create a shorter list of those that might need configuring; depending on what tools you have installed, it may be 3 or 4 tools that might need configuring.

    Then it depends on what you are using and how you have things set up.  For example, if you are doing Mixed-Signal design, then you might want to configure AMS Designer and give the path to your IUS installation.  Also, you may want to configure licensing, e.g. to start the license daemons automatically after a reboot - it may not be necessary to run this step depending on how your licenses are set up (e.g. I use the CDS_LIC_FILE environment variable, so I don't worry about having a license file in the share/license directory). Finally, you may wish to configure OpenAccess; OA is installed as part of the installation process now (previously you had to configure to get OA installed), so it should be where it is expected to be - but you might be sharing an OA installation across different tool releases, so you might want to configure this manually.

    I suggest you try it out and see what happens.

    Hopefully this helps a little.

    Regards,

    Lawrence.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.