Stats

  • Locked Locked
  • Replies 12
  • Subscribers 127
  • Views 17451
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

dbLayerTile need help

lrl1skdev

Hi everyone,

 I am writing a code where i needed to fracture layers vertically and horiontally. I used dbLayerTile to fracture them vertically and I created my own version that fracture layers horiontally since I could not find anything in the documantation that do this job. My problem is I wanted to boost the performance of the code so my first thought is to rotate them by 90deg and then execute dbLayerTile a second time then bring them altogether to their original position. But how to write this in a code in a simplest way still puzzles me.

Any suggestions?

Parents

  • Andrew,

    Finally,I am writing a skill code which increases poly length by 0.015 for the picture attached.

    I used

    polys=setof(sh cv~>shapes sh~>lpp==list("poly" "drawing"))

    dblayerTile(cv "active"  polys)

    but all the polys are getting increased by 0.015,in few cases there is an increase of 0.01(which is double)

    so,I dont know how to go about it. 

Reply

  • Andrew,

    Finally,I am writing a skill code which increases poly length by 0.015 for the picture attached.

    I used

    polys=setof(sh cv~>shapes sh~>lpp==list("poly" "drawing"))

    dblayerTile(cv "active"  polys)

    but all the polys are getting increased by 0.015,in few cases there is an increase of 0.01(which is double)

    so,I dont know how to go about it. 

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.