Stats

  • Locked Locked
  • Replies 9
  • Subscribers 124
  • Views 3498
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

wavescan waveforms -> CIW?

markbeck

I'm trying to figure out if it's possible to create a key-binding that could be used to dump a group of wavescan waveforms to the CIW.  I know that it's possible to dump waveforms to the calculator, but I've got a bunch of custom skill code routines that work best in the CIW.  

This is for the times that I've copied around waveforms between wavescan windows and I want to do some calulations on them (without having to resort to the calculator).

Optimally, this function would return a list of waveforms to the CIW.  

 I've looked through the awv finder functions, but I can't find anything like this.  It's almost as though wavescan was designed to be one-way only.

Mark

Parents
  • markbeck

     I realize I'm resurrecting an old thread, but I haven't found a solution to this.

    I'm now on version 6.14, but the situation hasn't improved.  

    Basic problem is that I've got a waveform plotted in a waveform viewer (e.g. viva)  and I want access to it in the CIW.  It is possible to copy the waveform from viva to the calculator, so I know that the data exists somewhere. However, how can I reliably get at the data through skill calls?

    awvGetWaveNameList() returns: list of numbers for the curves and list of corresponding names.

    Unfortunately, I've found that the returned list of numbers doesn't correspond to anything that I can use to grab that waveform.

     Has anything changed with the newer versions of Cadence or is there any planned future expansion to allow access to the waveforms?

    Thanks,

    Mark

Reply
  • markbeck

     I realize I'm resurrecting an old thread, but I haven't found a solution to this.

    I'm now on version 6.14, but the situation hasn't improved.  

    Basic problem is that I've got a waveform plotted in a waveform viewer (e.g. viva)  and I want access to it in the CIW.  It is possible to copy the waveform from viva to the calculator, so I know that the data exists somewhere. However, how can I reliably get at the data through skill calls?

    awvGetWaveNameList() returns: list of numbers for the curves and list of corresponding names.

    Unfortunately, I've found that the returned list of numbers doesn't correspond to anything that I can use to grab that waveform.

     Has anything changed with the newer versions of Cadence or is there any planned future expansion to allow access to the waveforms?

    Thanks,

    Mark

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.