Stats

  • Locked Locked
  • Replies 4
  • Subscribers 127
  • Views 14008
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ADE L | post-layout simulation | input.scs error | missing model

pitter

 Hi,

after successful RLC extraction I got a av_extracted view, which I set in ADE Setup->Environment... in the Switch View List in order to perform post-layout simulation. The netlist is created without any error. However, when I start to run a transient simulation I get te following error:



<< ERROR (SFE-23): "input.scs" 48743: ra4289 is an instance of an undefined model met4.>>

 There is a series of errors actually, with different model names (met4, met1, poly1) and number coming after "input.scs" in the above quoted error line.

I thought, the PDK (AMS C35 0.35um process) should provide such models, but I cannot find any in the Hit Kit directory.

 Thanks for help in advance,

Kind Regards,

 

pitter.

 

Parents

  • Hi Pitter

    Perhaps this can help to solve the problem:
    a. In the QRC form, go to "Netlisting" tab
    b. For "Parasitic Resistor Models", use "Include as comment" instead of "Include Model"

    Re-generate the extracted view and retry spectre simulation. : )

    Best regards
    Quek

Reply

  • Hi Pitter

    Perhaps this can help to solve the problem:
    a. In the QRC form, go to "Netlisting" tab
    b. For "Parasitic Resistor Models", use "Include as comment" instead of "Include Model"

    Re-generate the extracted view and retry spectre simulation. : )

    Best regards
    Quek

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.