Spacing for IO pins

Tswong,

Could you please tell me exactly what you try to achieve ?

Because it seems you have already pre-constrained pins fom top level or from an other block and you would like to mimic the placement in this block.If it is teh case then I can propose some other way to do it.

 For the 're-space' you can find the command in 'Edit -> Soft Pins -> Respace'. 

You have the deatils on the command at:

http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:DocumentViewer;src=pubs;q=prfref/prfref5.1.41/chap7.html#1048770

You need to search for 'Respacing Soft Pins'

Thanks,

Alex

Tswong,

Could you please tell me exactly what you try to achieve ?

Because it seems you have already pre-constrained pins fom top level or from an other block and you would like to mimic the placement in this block.If it is teh case then I can propose some other way to do it.

 For the 're-space' you can find the command in 'Edit -> Soft Pins -> Respace'. 

You have the deatils on the command at:

http://support.cadence.com/wps/mypoc/cos?uri=deeplinkmin:DocumentViewer;src=pubs;q=prfref/prfref5.1.41/chap7.html#1048770

You need to search for 'Respacing Soft Pins'

Thanks,

Alex