Stats

  • Locked Locked
  • Replies 9
  • Subscribers 126
  • Views 15302
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

EXT 9.1.1: About the compatibility with Cadence IC613 and with Assura 3.2

iamlearning

 Hi,

Would anyone please write me whether EXT 9.1.1 is compatible with Cadence IC613 and with Assura 3.2 or not? I downloaded them from the website of cadence but nowhere found the list of compatibility for the EXT 9.1 unlike Assura 3.2.

Thank you.

Parents

  • A few thoughts...

    1. I use an IBM PDK and I've been advised to stick with the tools that the kit was tested with. Specifically my PDK was tested with IC613 and MMSIM71, and the fab service said wait until the next kit patch before upgrading to see if the newer tools are supported.

    2. Are you sure that IC614 is a must for ASSURA41? I have a PDK from another foundry which says to use IC613, ASSURA41 and EXT82. I just installed the kit and haven't tested all the tools so I'm not sure if there truly is a compatibility issue.

Reply

  • A few thoughts...

    1. I use an IBM PDK and I've been advised to stick with the tools that the kit was tested with. Specifically my PDK was tested with IC613 and MMSIM71, and the fab service said wait until the next kit patch before upgrading to see if the newer tools are supported.

    2. Are you sure that IC614 is a must for ASSURA41? I have a PDK from another foundry which says to use IC613, ASSURA41 and EXT82. I just installed the kit and haven't tested all the tools so I'm not sure if there truly is a compatibility issue.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.