Stats

  • Locked Locked
  • Replies 4
  • Subscribers 127
  • Views 11185
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

You are trying to run a CDB executable on an OA library file 'symbol.oa'. You must run an OA executable to use that library file. How to solve?

800228

Hello,

 I have just installed the TSMC0.13um PDK (version: T-013-MM-SP-001-K3_1.3B). Our system uses cadence IC5141

After that, when I try to open a symbol of any components in tsmc013 library, following warnings appears:

*WARNING* ddMapGetFileViewType: You are trying to run a CDB executable on an OA library file 'symbol.oa'. The file is in library 'tsmc13rf' in cell 'rfnmos1v' in view 'symbol'. You must run an OA executable to use that library file.

I dont know how to solve the problem.

Guide me please. Thanks you. 

 

 

Parents

  • Hello, 

    I have learnt that tscm013 version T-013-MM-SP-001-K3_1.3B uses OA database.

    While IC5141 is only supported CDB database. That is why it cannot open any symbol view in the above library.

    Do you know any solution for this issue?

    Or I have to install a older version of TSMC013 that bases on CDB database?

    By the way, I have received following list of documents from TSMC for TSMC013:

    =========================================================

    0.13 micron mixed-signal (CR013G 1P8M FSG IMD) (12 documents)
    01. T-013-CM-SP-002 , Rev. 1.3, 0.13 UM CMOS MIXED SIGNAL RF GENERAL PURPOSE 1P8M SALICIDE 1.2&3.3V CU FSG SPICE MODEL 013G [22-OCT-2008; 33161k bytes] 

     02. T-013-MM-PC-001 , Rev. 2.1, 0.13UM MIXED SIGNAL/RF 1P8M SALICIDE PCM SPEC, 1.2V/2.5V (and others) [06-FEB-2007; 108k bytes]

    03. T-013-MM-SP-001 , Rev. 1.4, 0.13 UM MIXED SIGNAL 1P8M SALICIDE 1.2V/2.5V RF SPICE MODEL (CR013G) [20-MAY-2009; 34966k bytes]

    04. T-013-MM-SP-001-B1 , Rev. 1.3A, 0.13UM MIXED SIGNAL/RF 1P8M SALICIDE 1.2V/2.5V RC (STAR-RCXT) TECH FILE [25-MAY-2006; 105M bytes]

    05. T-013-MM-SP-001-C1 , Rev. 1.3D, 0.13 UM MIXED-SIGNAL 1P8M SALICIDE 1.2V/2.5V RF LVS (CALIBRE) COMMAND FILE [13-OCT-2008; 1788k bytes]

    06. T-013-MM-SP-001-E1 , Rev. 1.3C, 0.13 UM MIXED-SIGNAL 1P8M SALICIDE 1.2V/2.5V RF LVS (HERCULES) COMMAND FILE [16-OCT-2008; 1263k bytes]

    07. T-013-MM-SP-001-K1 , Rev. 1.3B, 0.13 UM MIXED SIGNAL/RF 1P8M SALICIDE FSG PDK, 1.2V/2.5V (and others) [24-JUL-2007; 384M bytes]

    08. T-013-MM-SP-001-K3 , Rev. 1.3B, 0.13 UM RF 1P8M SALICIDE 1.2V/2.5V/3.3V 1P8M FSG PDK (CR013G)(CADENCE OA6.1 VERSION) [08-AUG-2008; 368M bytes] .

    09. T-013-MM-SP-001-T1 , Rev. 1.3A, 0.13UM MIXED SIGNAL 1P8M SALICIDE 1.2V/2.5V RF PDK (MENTOR GRAPHICS) [14-NOV-2006; 1974k bytes]

    10. T-013-MM-SP-001-U1 , Rev. 1.4A, 0.13 UM MIXED-SIGNAL 1P8M SALICIDE 1.2V/2.5V RF LVS (ASSURA) COMMAND FILE [31-AUG-2009; 1686k bytes]

    11. T-013-MM-SP-001-V1 , Rev. 1.3A, 0.13UM MIXED SIGNAL/RF 1P8M SALICIDE 1.2V/2.5V RC (ASSURA) TECH FILE [25-MAY-2006; 219M bytes]

    12. T-013-MM-SP-001-X1 , Rev. 1.3A, 0.13UM MIXED SIGNAL/RF 1P8M SALICIDE 1.2V/2.5V RC (XCALIBRE) TECH FILE [09-MAY-2006; 2205k bytes]
    =========================================================

    What version should I choose for our application on IC5141 with ASSURA (Our main IC is a TIA with 3-dB bandwidth of 500MHz).

    (I have installed the PDK from document 08)

    Thanks you and best regards.

Reply

  • Hello, 

    I have learnt that tscm013 version T-013-MM-SP-001-K3_1.3B uses OA database.

    While IC5141 is only supported CDB database. That is why it cannot open any symbol view in the above library.

    Do you know any solution for this issue?

    Or I have to install a older version of TSMC013 that bases on CDB database?

    By the way, I have received following list of documents from TSMC for TSMC013:

    =========================================================

    0.13 micron mixed-signal (CR013G 1P8M FSG IMD) (12 documents)
    01. T-013-CM-SP-002 , Rev. 1.3, 0.13 UM CMOS MIXED SIGNAL RF GENERAL PURPOSE 1P8M SALICIDE 1.2&3.3V CU FSG SPICE MODEL 013G [22-OCT-2008; 33161k bytes] 

     02. T-013-MM-PC-001 , Rev. 2.1, 0.13UM MIXED SIGNAL/RF 1P8M SALICIDE PCM SPEC, 1.2V/2.5V (and others) [06-FEB-2007; 108k bytes]

    03. T-013-MM-SP-001 , Rev. 1.4, 0.13 UM MIXED SIGNAL 1P8M SALICIDE 1.2V/2.5V RF SPICE MODEL (CR013G) [20-MAY-2009; 34966k bytes]

    04. T-013-MM-SP-001-B1 , Rev. 1.3A, 0.13UM MIXED SIGNAL/RF 1P8M SALICIDE 1.2V/2.5V RC (STAR-RCXT) TECH FILE [25-MAY-2006; 105M bytes]

    05. T-013-MM-SP-001-C1 , Rev. 1.3D, 0.13 UM MIXED-SIGNAL 1P8M SALICIDE 1.2V/2.5V RF LVS (CALIBRE) COMMAND FILE [13-OCT-2008; 1788k bytes]

    06. T-013-MM-SP-001-E1 , Rev. 1.3C, 0.13 UM MIXED-SIGNAL 1P8M SALICIDE 1.2V/2.5V RF LVS (HERCULES) COMMAND FILE [16-OCT-2008; 1263k bytes]

    07. T-013-MM-SP-001-K1 , Rev. 1.3B, 0.13 UM MIXED SIGNAL/RF 1P8M SALICIDE FSG PDK, 1.2V/2.5V (and others) [24-JUL-2007; 384M bytes]

    08. T-013-MM-SP-001-K3 , Rev. 1.3B, 0.13 UM RF 1P8M SALICIDE 1.2V/2.5V/3.3V 1P8M FSG PDK (CR013G)(CADENCE OA6.1 VERSION) [08-AUG-2008; 368M bytes] .

    09. T-013-MM-SP-001-T1 , Rev. 1.3A, 0.13UM MIXED SIGNAL 1P8M SALICIDE 1.2V/2.5V RF PDK (MENTOR GRAPHICS) [14-NOV-2006; 1974k bytes]

    10. T-013-MM-SP-001-U1 , Rev. 1.4A, 0.13 UM MIXED-SIGNAL 1P8M SALICIDE 1.2V/2.5V RF LVS (ASSURA) COMMAND FILE [31-AUG-2009; 1686k bytes]

    11. T-013-MM-SP-001-V1 , Rev. 1.3A, 0.13UM MIXED SIGNAL/RF 1P8M SALICIDE 1.2V/2.5V RC (ASSURA) TECH FILE [25-MAY-2006; 219M bytes]

    12. T-013-MM-SP-001-X1 , Rev. 1.3A, 0.13UM MIXED SIGNAL/RF 1P8M SALICIDE 1.2V/2.5V RC (XCALIBRE) TECH FILE [09-MAY-2006; 2205k bytes]
    =========================================================

    What version should I choose for our application on IC5141 with ASSURA (Our main IC is a TIA with 3-dB bandwidth of 500MHz).

    (I have installed the PDK from document 08)

    Thanks you and best regards.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.