Stats

  • Locked Locked
  • Replies 15
  • Subscribers 124
  • Views 11040
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

cadence 5 current simulation

StreamCX

1) I try simulate in ADE.Cadence 5.
When I select currents to plot output before simulations I can simulate that and view results (currents in schematic).
When I try add some pins to view current output after simulation, appears evaluate error.

[img]img715.imageshack.us/.../img]

How can I do current analysis?

Can i change this params (type current to voltage in picture or inversely)?

[URL=http://img709.imageshack.us/i/outputsetup.png/][IMG]img709.imageshack.us/.../URL]

2) I can see currents only in nodes,

[img]img80.imageshack.us/.../img]

How can i see that in wires?

[img]img7.imageshack.us/.../img]

Parents

  • Andrew Beckett said:
    Tarek - minor point - it might be a view other than schematic in the path, e.g. config - the best thing is to look at the path at the top of the window when you display or create the netlist from the Simulation->Netlist menu (particularly if this is an inexperienced user).

     

    Thanks for pointing that out, Andrew. StreamCX - if you are still simulating the same cell as in the first post, input.scs would be located in /home/stream/simulation/ADC8/spectre/schematic/netlist. Otherwise if you would modify that path to reflect the new cell (currently ADC8) and, if necessary, cellview (currently schematic) to find input.scs. 

    Tarek

Reply

  • Andrew Beckett said:
    Tarek - minor point - it might be a view other than schematic in the path, e.g. config - the best thing is to look at the path at the top of the window when you display or create the netlist from the Simulation->Netlist menu (particularly if this is an inexperienced user).

     

    Thanks for pointing that out, Andrew. StreamCX - if you are still simulating the same cell as in the first post, input.scs would be located in /home/stream/simulation/ADC8/spectre/schematic/netlist. Otherwise if you would modify that path to reflect the new cell (currently ADC8) and, if necessary, cellview (currently schematic) to find input.scs. 

    Tarek

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.