Stats

  • Locked Locked
  • Replies 1
  • Subscribers 126
  • Views 13806
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem with Simulation

tianyvonne

I have tried several times but the result is the same with following problems. If anyone has answers, please reply me. Thanks.

Loading /mnt/pollux/software/cadence/MMSIM70/tools.lnx86/cmi/lib/5.0/libinfineon_sh.so ...
Loading /mnt/pollux/software/cadence/MMSIM70/tools.lnx86/cmi/lib/5.0/libphilips_sh.so ...
Loading /mnt/pollux/software/cadence/MMSIM70/tools.lnx86/cmi/lib/5.0/libsparam_sh.so ...
Loading /mnt/pollux/software/cadence/MMSIM70/tools.lnx86/cmi/lib/5.0/libstmodels_sh.so ...
Using new Spectre Parser.

Error found by spectre in `_sub0', during circuit read-in.
    ERROR (SFE-23): "input.scs" 14: M2 is an instance of an undefined model PMOS_VTG.
    ERROR (SFE-23): "input.scs" 15: M1 is an instance of an undefined model PMOS_VTG.
    ERROR (SFE-23): "input.scs" 16: M0 is an instance of an undefined model PMOS_VTG.
    ERROR (SFE-23): "input.scs" 17: M8 is an instance of an undefined model NMOS_VTG.
    ERROR (SFE-23): "input.scs" 18: M7 is an instance of an undefined model NMOS_VTG.
    ERROR (SFE-23): "input.scs" 19: M5 is an instance of an undefined model NMOS_VTG.
    ERROR (SFE-23): "input.scs" 20: M9 is an instance of an undefined model NMOS_VTG.
    ERROR (SFE-23): "input.scs" 21: M3 is an instance of an undefined model NMOS_VTG.
    ERROR (SFE-23): "input.scs" 22: CCOMP is an instance of an undefined model ccomp.

spectre terminated prematurely due to fatal error.

Parents

  • I know it has been 5 years since you asked the question. 

    Maybe you already fixed this problem.

    However, because I met this problem in the earlier time.

    So I share the way I fixed it with you.

    You see. It's basically the same error.

    --------------------------------------------------------------------------------------------

    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libinfineon_sh.so ...
    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libnortel_sh.so ...
    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libphilips_sh.so ...
    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libsparam_sh.so ...
    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libstmodels_sh.so ...
    spectre (ver. 6.1.1.133 -- 20 Nov 2006).

    Protected by U.S. Patents: 5,610,847; 5,790,436; 5,812,431; 5,859,785; 5,949,992; 5,987,238; 6,088,523; 6,101,323; 6,151,698; 6,181,754; 6,260,176; 6,278,964; 6,349,272; 6,374,390; 6,493,849; 6,504,885; 6,618,837; 6,636,839; 6,778,025; 6,832,358; 6,851,097; 7,035,782; 7,085,700
    Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

    Simulating `input.scs' on ee03 at 6:15:28 PM, Mon Apr 20, 2015.
    Using new Spectre Parser.

    Error found by spectre in `_sub0', during circuit read-in.
    "input.scs" 13: M11 is an instance of an undefined model n_33_mm.
    "input.scs" 15: M10 is an instance of an undefined model n_33_mm.
    "input.scs" 17: M9 is an instance of an undefined model n_33_mm.
    "input.scs" 21: C0 is an instance of an undefined model mimcaps_mm.
    "input.scs" 22: R3 is an instance of an undefined model rnnpo_mm.
    "input.scs" 23: R2 is an instance of an undefined model rnnpo_mm.
    "input.scs" 24: R1 is an instance of an undefined model rnnpo_mm.
    "input.scs" 25: R0 is an instance of an undefined model rnnpo_mm.
    "input.scs" 26: M7 is an instance of an undefined model p_33_mm.
    "input.scs" 29: M6 is an instance of an undefined model p_33_mm.
    "input.scs" 32: M5 is an instance of an undefined model p_33_mm.
    "input.scs" 35: M4 is an instance of an undefined model p_33_mm.
    "input.scs" 38: M3 is an instance of an undefined model p_33_mm.
    "input.scs" 41: M1 is an instance of an undefined model p_33_mm.
    "input.scs" 43: M2 is an instance of an undefined model p_33_mm.

    spectre terminated prematurely due to fatal error.

    --------------------------------------------------------------------------------------------

    Here is the way I fixed it.

    You go to the "Analog Design Environment" window and click "Setup".

    Then "Model libraries".

    If the largest row is empty, follow the steps below.

    1.Click "Property".

    2.Click every element, source, symbol one by one in you schematic, then click "Ok" in the "Edit Object Properties" window.

    3.Go to the "Model libraries" again. It's not empty anymore!

    4.Continue your simulation.

    But I am not sure this way is temporary or permanent.

    Hope it's helpful!

    Best Regards.

    Shih-Hsing Chen(陳世興).

Reply

  • I know it has been 5 years since you asked the question. 

    Maybe you already fixed this problem.

    However, because I met this problem in the earlier time.

    So I share the way I fixed it with you.

    You see. It's basically the same error.

    --------------------------------------------------------------------------------------------

    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libinfineon_sh.so ...
    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libnortel_sh.so ...
    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libphilips_sh.so ...
    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libsparam_sh.so ...
    Loading /usr/mmsim61/tools.lnx86/cmi/lib/5.0/libstmodels_sh.so ...
    spectre (ver. 6.1.1.133 -- 20 Nov 2006).

    Protected by U.S. Patents: 5,610,847; 5,790,436; 5,812,431; 5,859,785; 5,949,992; 5,987,238; 6,088,523; 6,101,323; 6,151,698; 6,181,754; 6,260,176; 6,278,964; 6,349,272; 6,374,390; 6,493,849; 6,504,885; 6,618,837; 6,636,839; 6,778,025; 6,832,358; 6,851,097; 7,035,782; 7,085,700
    Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

    Simulating `input.scs' on ee03 at 6:15:28 PM, Mon Apr 20, 2015.
    Using new Spectre Parser.

    Error found by spectre in `_sub0', during circuit read-in.
    "input.scs" 13: M11 is an instance of an undefined model n_33_mm.
    "input.scs" 15: M10 is an instance of an undefined model n_33_mm.
    "input.scs" 17: M9 is an instance of an undefined model n_33_mm.
    "input.scs" 21: C0 is an instance of an undefined model mimcaps_mm.
    "input.scs" 22: R3 is an instance of an undefined model rnnpo_mm.
    "input.scs" 23: R2 is an instance of an undefined model rnnpo_mm.
    "input.scs" 24: R1 is an instance of an undefined model rnnpo_mm.
    "input.scs" 25: R0 is an instance of an undefined model rnnpo_mm.
    "input.scs" 26: M7 is an instance of an undefined model p_33_mm.
    "input.scs" 29: M6 is an instance of an undefined model p_33_mm.
    "input.scs" 32: M5 is an instance of an undefined model p_33_mm.
    "input.scs" 35: M4 is an instance of an undefined model p_33_mm.
    "input.scs" 38: M3 is an instance of an undefined model p_33_mm.
    "input.scs" 41: M1 is an instance of an undefined model p_33_mm.
    "input.scs" 43: M2 is an instance of an undefined model p_33_mm.

    spectre terminated prematurely due to fatal error.

    --------------------------------------------------------------------------------------------

    Here is the way I fixed it.

    You go to the "Analog Design Environment" window and click "Setup".

    Then "Model libraries".

    If the largest row is empty, follow the steps below.

    1.Click "Property".

    2.Click every element, source, symbol one by one in you schematic, then click "Ok" in the "Edit Object Properties" window.

    3.Go to the "Model libraries" again. It's not empty anymore!

    4.Continue your simulation.

    But I am not sure this way is temporary or permanent.

    Hope it's helpful!

    Best Regards.

    Shih-Hsing Chen(陳世興).

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.