Stats

  • Locked Locked
  • Replies 3
  • Subscribers 125
  • Views 15652
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Elaboration error in AMS simulator

kasyab

 Hi, 

   I am a newbie with AMS and am using IC-5.1.41.USR5 to run a mixed signal simulation with Verilog AMS, vhdl and schematic components. I run the simulation from the configuration  -> schematic (open) -> Analog Environment. Under setup I choose the ams simulator and setup the correct model files. I checked the netlisting options and saw that the cell based netlister is being used. However, netlisting goes through without any errors. Elaboration  produces the following error:

 *F,DLPAKO (No HDL source,0|0): Unable to open packed library for functional (Permission denied).
------
A packed library was found in initialization. However,
ncelab failed to open it. This may be caused by permissions
problems or by interference from another process or user.

 This is the complete error shown by NC-Browse. I am unable to figure out which library is being referred to here. Any tips in tracing this back would help.

 Thanks.

Kasyab 

Parents Reply Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.