Stats

  • Locked Locked
  • Replies 2
  • Subscribers 125
  • Views 13565
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to get rid of 4 connection junction warning, IC6.14

Kabal

 It gives me warning if i have 4 connections to junction in schematic, how to get rid of that? cant find anything regarding that in manuals

Parents
  • skillUser

     Hi Kabal,

    In the Schematic window use the menu Check -> Rules Setup and on the form look at the Physical checks tab, on there is an item named "Solder On CrossOver"  - change this to "ignored" and you will not receive the warning about this type of connection any more.

    Hope this helps,

    Lawrence.

Reply
  • skillUser

     Hi Kabal,

    In the Schematic window use the menu Check -> Rules Setup and on the form look at the Physical checks tab, on there is an item named "Solder On CrossOver"  - change this to "ignored" and you will not receive the warning about this type of connection any more.

    Hope this helps,

    Lawrence.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.