Stats

  • Locked Locked
  • Replies 12
  • Subscribers 127
  • Views 20838
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem wuth tool configuring after installation (IC6.15)

Pavel47

 Hello,

1st time I've installed IC6.15 on the RHEL5.4. Everything was OK.

For some reasons I nedded to change the OS for RHEL6.2. This time installation was OK, but next step - tool configuration - failed.

Inside of the iscape_log file I've found nothing, that I could explore to debug the problem. Below I've put the extract from escape log.

So, I've 2 questions:

1. Is configuration phase crucial for the tool functionnality ?

2. How can I debug this issue if there is no consistent diagnostic info ?

Thank you in advance.

Pavel.

P.S. Extract from escape_log (final part):

Running Configuration of components in GUI.
Running:/bin/sh /opt/Cadence/IC615/install/tmp/slconfig.sh CSRCO07.24-p031lnx86
Error::Return Value is:1
Running:/bin/sh /opt/Cadence/IC615/install/tmp/slconfig.sh amsEnv06.15-p003lnx86
Error::Return Value is:1
Running:/bin/sh /opt/Cadence/IC615/install/tmp/slconfig.sh DFII_ncvhdl64b09.20-s030lnx86
Error::Return Value is:1
Running:/bin/sh /opt/Cadence/IC615/install/tmp/slconfig.sh CSRCOIndep07.24-p031
Error::Return Value is:1
Running:/bin/sh /opt/Cadence/IC615/install/tmp/slconfig.sh lfvhdComp02.85-a002lnx86
Error::Return Value is:1
Running:/bin/sh /opt/Cadence/IC615/install/tmp/slconfig.sh DFII_ncvhdl09.20-s030lnx86
Error::Return Value is:1
Running:/bin/sh /opt/Cadence/IC615/install/tmp/slconfig.sh oaRedist22.41-p004lnx86
Error::Return Value is:1
Running:/bin/sh /opt/Cadence/IC615/install/tmp/slconfig.sh ihdl06.15-p003lnx86
Error::Return Value is:1

Parents

  •  Andrew,

    I've advanced in my investigations - I think it's isn't Cadence issue, but rather RHEL. Obviously the problem comes from hostname. When I worked with RHEL5.2, there were no specific hostname - the output of the hostname command was localhost.localname or something like this. When I intalled RHEL6.2 I specified hostname - now it's Missouri. But surprisingly this hostname isn't completely recognized by system. When I do hostname, it's Ok, but ping doesn't work:

    [Pavel@Missouri ~]$ hostname
    Missouri
    [Pavel@Missouri ~]$ ping Missouri
    ping: unknown host Missouri

    Moreover when I force to run license manager and see log file, I constate that my hostname is unknown:

     $CDS_ROOT/tools/bin/lmgrd -c $LM_LICENSE_FILE -l /var/log/ic615_debug.log

    Here is extract from .log file:

    19:11:29 (lmgrd) The license server manager (lmgrd) running as root:
    19:11:29 (lmgrd)     This is a potential security problem
    19:11:29 (lmgrd)     and is not recommended.
    19:11:29 (lmgrd) Unknown host: Missouri
    19:11:29 (lmgrd) EXITING DUE TO SIGNAL 33 Exit reason 1

    I searched on the inet for the similar issues and found following solution - add my hostname in the /etc/resolv.conf.  I tried it, but without success.

    Regards.

    Pavel.

Reply

  •  Andrew,

    I've advanced in my investigations - I think it's isn't Cadence issue, but rather RHEL. Obviously the problem comes from hostname. When I worked with RHEL5.2, there were no specific hostname - the output of the hostname command was localhost.localname or something like this. When I intalled RHEL6.2 I specified hostname - now it's Missouri. But surprisingly this hostname isn't completely recognized by system. When I do hostname, it's Ok, but ping doesn't work:

    [Pavel@Missouri ~]$ hostname
    Missouri
    [Pavel@Missouri ~]$ ping Missouri
    ping: unknown host Missouri

    Moreover when I force to run license manager and see log file, I constate that my hostname is unknown:

     $CDS_ROOT/tools/bin/lmgrd -c $LM_LICENSE_FILE -l /var/log/ic615_debug.log

    Here is extract from .log file:

    19:11:29 (lmgrd) The license server manager (lmgrd) running as root:
    19:11:29 (lmgrd)     This is a potential security problem
    19:11:29 (lmgrd)     and is not recommended.
    19:11:29 (lmgrd) Unknown host: Missouri
    19:11:29 (lmgrd) EXITING DUE TO SIGNAL 33 Exit reason 1

    I searched on the inet for the similar issues and found following solution - add my hostname in the /etc/resolv.conf.  I tried it, but without success.

    Regards.

    Pavel.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.