Stats

  • Locked Locked
  • Replies 3
  • Subscribers 126
  • Views 17865
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

How to enable psfxl output with AMS sim in ADE L?

greatqs
I'm using AMS simulation thru ADE L in IC615.500.10 and want to enable psfxl format as transient output which is claimed to be supported. But I don't found any check box or selection in Outputs - Save All form.

Anyone knows how to enable psfxl? Thanks!
Parents

  • Hi greatqs

    You can ignore the warning. It should actually be an info message and not warning. I just tested it using ncsim 11.10-s058 and IC615-500-12 and can successfully generate a tran.tran.tran file in the "psf" results directory. Would you please check again to see if you have made any mistakes in the setup?

    Thanks
    Quek

Reply

  • Hi greatqs

    You can ignore the warning. It should actually be an info message and not warning. I just tested it using ncsim 11.10-s058 and IC615-500-12 and can successfully generate a tran.tran.tran file in the "psf" results directory. Would you please check again to see if you have made any mistakes in the setup?

    Thanks
    Quek

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.