Stats

Locked Locked
Replies 10
Subscribers 127
Views 22219
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Corner Simulation Error

I am trying to do corner simulation. I have set up the corner simulation by clicking   import PCF button and from my pdk install directory by selecting the pcf file. After successfully loading the corner for analysis, in the run mode pane, I selected Single Run, Sweeps and Corners and it showed 3 corner plus the nominal corner are checked to be available for simulation. Then I clicked the green button in ADE XL.

My version is Virtuoso Analog Design Environment Version IC6.1.5 -64b.500.15

Then after simulation is completed, I get the following error messages. What could be the problem?

Here is what I get.

Simulating `input.scs' on tcad1.tec.ufl.edu at 7:39:44 AM, Mon Mar 25, 2013 (process id: 23180).

Command line:

    /apps/cds/mmsim101/tools.lnx86/spectre/bin/64bit/spectre input.scs \

        +escchars +log ../psf/spectre.out -format psfxl -raw ../psf \

        +lqtimeout 900 -maxw 5 -maxn 5

Loading /apps/cds/mmsim101/tools.lnx86/cmi/lib/64bit/5.0/libinfineon_sh.so ...

Loading /apps/cds/mmsim101/tools.lnx86/cmi/lib/64bit/5.0/libphilips_sh.so ...

Loading /apps/cds/mmsim101/tools.lnx86/cmi/lib/64bit/5.0/libsparam_sh.so ...

Loading /apps/cds/mmsim101/tools.lnx86/cmi/lib/64bit/5.0/libstmodels_sh.so ...

Error found by spectre during circuit read-in.

    ERROR (SFE-868): "input.scs" 8: Unable to open input file `cor_rfmos.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 9: Unable to open input file `cor_rfmos33.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 10: Unable to open input file `cor_rfmvar.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 11: Unable to open input file `cor_rfmvar_33.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 12: Unable to open input file `cor_rfjvar.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 13: Unable to open input file `cor_rfres_sa.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 14: Unable to open input file `cor_rfres_rpo.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 15: Unable to open input file `cor_rfres_hri.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 16: Unable to open input file `cor_rfesd.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 17: Unable to open input file `cor_rfsbd.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 18: Unable to open input file `cor_rffmom.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 19: Unable to open input file `cor_rfmim.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 20: Unable to open input file `cor_rfind.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 21: Unable to open input file `cor_std_mos.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 22: Unable to open input file `cor_3v.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 23: Unable to open input file `cor_m.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 24: Unable to open input file `cor_3m.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 25: Unable to open input file `cor_na.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 26: Unable to open input file `cor_3vna.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 27: Unable to open input file `cor_bip.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 28: Unable to open input file `cor_bip3.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 29: Unable to open input file `cor_dio.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 30: Unable to open input file `cor_dio3.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 31: Unable to open input file `cor_dio_m.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 32: Unable to open input file `cor_dio_3m.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 33: Unable to open input file `cor_dio_dnw.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 34: Unable to open input file `cor_res.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 35: Unable to open input file `cor_disres.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 36: Unable to open input file `cor_bbmvar.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 37: Unable to open input file `cor_mim.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 38: Unable to open input file `cor_rtmom.scs'.

        No such file or directory.

    ERROR (SFE-868): "input.scs" 39: Unable to open input file `cor_fmom.scs'.

        No such file or directory.

Time for NDB Parsing: CPU = 82.986 ms, elapsed = 106.877 ms.

Time accumulated: CPU = 82.986 ms, elapsed = 106.877 ms.

Peak resident memory used = 33.9 Mbytes.

Time for parsing: CPU = 0 s, elapsed = 9.05991 us.

Time accumulated: CPU = 83.986 ms, elapsed = 107.051 ms.

Peak resident memory used = 33.9 Mbytes.

Aggregate audit (7:39:44 AM, Mon Mar 25, 2013):

Time used: CPU = 85 ms, elapsed = 109 ms, util. = 78.3%.

Time spent in licensing: elapsed = 55.9 ms, percentage of total = 51.5%.

Peak memory used = 33.9 Mbytes.

Simulation started at: 7:39:44 AM, Mon Mar 25, 2013, ended at: 7:39:44 AM, Mon Mar 25, 2013, with elapsed time (wall clock): 109 ms.

spectre completes with 32 errors, 0 warnings, and 0 notices.

spectre terminated prematurely due to fatal error.

Parents

Andrew Beckett over 8 years ago
A few problems with your post:

You've appended on the end of an old thread (which is actually about spectre - so a different simulator). The Forum Guidelines ask you not to do this - please read them. That also asks you not to write in "text message" language (like "ur talking about") as this decreases the chance of your question being answered.

Your question is about HSPICE, which is a simulator from Synopsys (not Cadence), so this is probably not the best place to ask this question.

"the 65nm tech" is not very specific - which technology are you talking about (which foundry)?

The most likely problem is that you've not included one of the required model files, but that might be best answered by somebody with specific knowledge of the particular models you're trying to use (this is almost certainly covered in the documentation from the foundry).

Regards,

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Andrew Beckett over 8 years ago
A few problems with your post:

You've appended on the end of an old thread (which is actually about spectre - so a different simulator). The Forum Guidelines ask you not to do this - please read them. That also asks you not to write in "text message" language (like "ur talking about") as this decreases the chance of your question being answered.

Your question is about HSPICE, which is a simulator from Synopsys (not Cadence), so this is probably not the best place to ask this question.

"the 65nm tech" is not very specific - which technology are you talking about (which foundry)?

The most likely problem is that you've not included one of the required model files, but that might be best answered by somebody with specific knowledge of the particular models you're trying to use (this is almost certainly covered in the documentation from the foundry).

Regards,

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.