Stats

  • Locked Locked
  • Replies 5
  • Subscribers 126
  • Views 15694
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ERROR (VACOMP-1008): Cannot compile ahdlcmi module library when I practice the AMSKIT615 package.

Alex Liao

I got this error when I was practicing Cadence AMS Methodology kit (05B_AnalogBlockDesignOptimization) using IC6.1.5. My OS is Unix 32-bit.

"ERROR (ADEXL-5011): While simulating run LocalOpt.1, point 48, test freq_low, received error:

Simulation Error:

------------------------------

Simulator failed to complete the simulation.

 Error found by spectre during AHDL read-in.

Error found by spectre during AHDL read-in.

ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB/5084_dfII_zambezi_pll_vco_thermdecode_veriloga_veriloga

.va.pll_vco_thermdecode.ahdlcmi/Linux/../ahdlcmi.out for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL 0', and try again. 

If the reason for the failure was a syntax error, contact your Cadence Customer Support representative with the netlist, log files, behavioral model f

iles, and any other information that can help identify the problem.

ERROR (SFE-91): Error when elaborating the instance pll_vco_thermdecode. Simulation should be terminated.

Error found by spectre during AHDL read-in.

Error found by spectre during AHDL read-in.

ERROR (VACOMP-2235): Internal Compiling Error: The built-in termcurs parameter is redefined in module 'pll_vco_thermdecode'.

ERROR (VACOMP-1816): Exiting AHDL compilation.

ERROR (SFE-91): Error when elaborating the instance pll_vco_thermdecode. Simulation should be terminated.

Error found by spectre during AHDL read-in.

Error found by spectre during AHDL read-in.

ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB/5084_dfII_zambezi_sim_pll_vco_stim_veriloga_veriloga.va

.pll_vco_stim.ahdlcmi/Linux/../ahdlcmi.out for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL 0', and try again. If the rea

son for the failure was a syntax error, contact your Cadence Customer Support representative with the netlist, log files, behavioral model files, and 

any other information that can help identify the problem.

ERROR (SFE-91): Error when elaborating the instance pll_vco_stim. Simulation should be terminated.

 For details open log: /users/labnet2/fs5/tl4528/my_AMS/AMSKIT_tl4528/modules/05_AMSConstraintDrivenBlockCreate/05B_AnalogBlockDesignOptimization/DB/simulation/AMSBC/pll_vco_sim/adexl_opt/results/data/LocalOpt.1/48/freq_low/psf/spectre.out

 ------------------------------

For more details, consult the job log file:

/users/labnet2/fs5/tl4528/my_AMS/AMSKIT_tl4528/modules/05_AMSConstraintDrivenBlockCreate/05B_AnalogBlockDesignOptimization/DB/logs_tl4528/Job0.log" 

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

This is just a section of error message. Other message are all similar like this section. 

Also this message in CIW happened when I tried to run any simulation or optimaizaiton followed by AMSKit 05B tutorial. 

If someone could help me, I would appreiciate that.

Thanks. 

 

 

 

Parents

  • Alex,

    Are you sure you're running on a 32-bit OS? What do you get if you run "uname -a" or "spectre -64 -debug3264 -W"

    For all releases that require RHEL5, we only support 64 bit OS - so you really should install a 64 bit OS (unless of course you are using 32 bit hardware, which must mean that the machine is really old).

    If you try to run MMSIM11.1 on a 32 bit OS, it will not be able to compile any VerilogA models at all, because the installation does not include the 32-bit version of gcc, needed for the compilation.

    Regards,

    Andrew.

Reply

  • Alex,

    Are you sure you're running on a 32-bit OS? What do you get if you run "uname -a" or "spectre -64 -debug3264 -W"

    For all releases that require RHEL5, we only support 64 bit OS - so you really should install a 64 bit OS (unless of course you are using 32 bit hardware, which must mean that the machine is really old).

    If you try to run MMSIM11.1 on a 32 bit OS, it will not be able to compile any VerilogA models at all, because the installation does not include the 32-bit version of gcc, needed for the compilation.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.