Stats

Locked Locked
Replies 5
Subscribers 126
Views 15694
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

ERROR (VACOMP-1008): Cannot compile ahdlcmi module library when I practice the AMSKIT615 package.

I got this error when I was practicing Cadence AMS Methodology kit (05B_AnalogBlockDesignOptimization) using IC6.1.5. My OS is Unix 32-bit.

"ERROR (ADEXL-5011): While simulating run LocalOpt.1, point 48, test freq_low, received error:

Simulation Error:

------------------------------

Simulator failed to complete the simulation.

Error found by spectre during AHDL read-in.

ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB/5084_dfII_zambezi_pll_vco_thermdecode_veriloga_veriloga

.va.pll_vco_thermdecode.ahdlcmi/Linux/../ahdlcmi.out for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL 0', and try again.

If the reason for the failure was a syntax error, contact your Cadence Customer Support representative with the netlist, log files, behavioral model f

iles, and any other information that can help identify the problem.

ERROR (SFE-91): Error when elaborating the instance pll_vco_thermdecode. Simulation should be terminated.

Error found by spectre during AHDL read-in.

ERROR (VACOMP-2235): Internal Compiling Error: The built-in termcurs parameter is redefined in module 'pll_vco_thermdecode'.

ERROR (VACOMP-1816): Exiting AHDL compilation.

ERROR (SFE-91): Error when elaborating the instance pll_vco_thermdecode. Simulation should be terminated.

Error found by spectre during AHDL read-in.

ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB/5084_dfII_zambezi_sim_pll_vco_stim_veriloga_veriloga.va

.pll_vco_stim.ahdlcmi/Linux/../ahdlcmi.out for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL 0', and try again. If the rea

son for the failure was a syntax error, contact your Cadence Customer Support representative with the netlist, log files, behavioral model files, and

any other information that can help identify the problem.

ERROR (SFE-91): Error when elaborating the instance pll_vco_stim. Simulation should be terminated.

For details open log: /users/labnet2/fs5/tl4528/my_AMS/AMSKIT_tl4528/modules/05_AMSConstraintDrivenBlockCreate/05B_AnalogBlockDesignOptimization/DB/simulation/AMSBC/pll_vco_sim/adexl_opt/results/data/LocalOpt.1/48/freq_low/psf/spectre.out

------------------------------

For more details, consult the job log file:

/users/labnet2/fs5/tl4528/my_AMS/AMSKIT_tl4528/modules/05_AMSConstraintDrivenBlockCreate/05B_AnalogBlockDesignOptimization/DB/logs_tl4528/Job0.log"

----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

This is just a section of error message. Other message are all similar like this section.

Also this message in CIW happened when I tried to run any simulation or optimaizaiton followed by AMSKit 05B tutorial.

If someone could help me, I would appreiciate that.

Thanks.

Parents

Alex Liao over 12 years ago

Hi Andrew,
This is the result by typing the two command you gave me.

$ uname -a
Linux cadlamss 2.6.18-348.4.1.el5PAE #1 SMP Fri Mar 22 05:46:19 EDT 2013 i686 i686 i386 GNU/Linux
$ spectre -64 -debug3264 -W
-------- 32/64 bit wrapper diagnostics -------------
App name: spectre
App path: /CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/bin
OS is 32-bit capable.
The user has selected 64-bit operation via the command line switch.
A 64-bit version of the application exists.
A 32-bit version of the application exists.
Original share library path:
LD_LIBRARY_PATH : /CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mdl/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mmsim/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/inca/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/dfII/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/64bit/SuSE:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/SuSE::/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/lib
DBType UNKNOWN
doOA: 0 doTools: 1 doQT: 0
rm64SharedLibPath sets LD_LIBRARY_PATH=/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mdl/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mmsim/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/inca/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/64bit/SuSE:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/SuSE:.:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/lib
----------------------------------------------------
PATH : /CMC/tools/cadence/ASSURA04.12.014-615_lnx86/tools/bin:/CMC/tools/cadence/ASSURA04.12.014-615_lnx86/tools/assura/bin:/CMC/kits/local/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/dfII/local/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/dfII/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/bin:/CMC/tools/cadence/EDI10.13.003_lnx86/tools/bin:/CMC/tools/cadence/PVE11.10.531_lnx86/bin:/CMC/tools/cadence/PVE11.10.531_lnx86/tools/bin:/CMC/tools/cadence/ETS10.13.003_lnx86/tools/bin:/CMC/tools/cadence/CONFRML10.10.540_lnx86/bin:/CMC/tools/cadence/CONFRML10.10.540_lnx86/tools/cfm/bin:/CMC/tools/cadence/INCISIV10.20.040_lnx86/tools/bin:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/dfII/bin:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/verilog/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/simvisdai/bin:/CMC/tools/cadence/ICC11241USR5_lnx86/tools/iccraft/bin:/CMC/tools/cadence/ICC11241USR5_lnx86/tools/bin:/CMC/tools/mentor/ixl_cal_2010.4_26.16/bin:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/dfII/bin:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/bin:/CMC/tools/cadence/ASSURA04.12.014-615_lnx86/tools/bin:/CMC/tools/cadence/ASSURA04.12.014-615_lnx86/tools/assura/bin:/CMC/kits/local/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/dfII/local/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/dfII/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/bin:/CMC/tools/cadence/EDI10.13.003_lnx86/tools/bin:/CMC/tools/cadence/PVE11.10.531_lnx86/bin:/CMC/tools/cadence/PVE11.10.531_lnx86/tools/bin:/CMC/tools/cadence/ETS10.13.003_lnx86/tools/bin:/CMC/tools/cadence/CONFRML10.10.540_lnx86/bin:/CMC/tools/cadence/CONFRML10.10.540_lnx86/tools/cfm/bin:/CMC/tools/cadence/INCISIV10.20.040_lnx86/tools/bin:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/dfII/bin:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/bin:/CMC/tools/synopsys/syn_vD-2010.03-SP4/bin:/CMC/tools/synopsys/syn_vD-2010.03-SP4/linux/syn/bin:/CMC/tools/synopsys/syn_vD-2010.03-SP4:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/verilog/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/simvisdai/bin:/CMC/tools/cadence/ICC11241USR5_lnx86/tools/iccraft/bin:/CMC/tools/cadence/ICC11241USR5_lnx86/tools/bin:/CMC/tools/mentor/ixl_cal_2010.4_26.16/bin:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/dfII/bin:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/bin:/local/bin:./:/usr/bin:/local/bin:./
LD_LIBRARY_PATH : /CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mdl/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mmsim/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/inca/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/64bit/SuSE:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/SuSE:.:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/lib
CDS_AUTO_64BIT : NULL
Launching "/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/bin/32bit/spectre -W"
----------------------------------------
sub-version 11.1.0.366.isr7
I think I am using the 32-bit OS on the server side of my department. But we have 64-bit OS server side as well. So I can tell you sugget me try the same simulation on 64-bit OS. I should have no problem, right?

Thanks,
Alex
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Alex Liao over 12 years ago

Hi Andrew,
This is the result by typing the two command you gave me.

$ uname -a
Linux cadlamss 2.6.18-348.4.1.el5PAE #1 SMP Fri Mar 22 05:46:19 EDT 2013 i686 i686 i386 GNU/Linux
$ spectre -64 -debug3264 -W
-------- 32/64 bit wrapper diagnostics -------------
App name: spectre
App path: /CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/bin
OS is 32-bit capable.
The user has selected 64-bit operation via the command line switch.
A 64-bit version of the application exists.
A 32-bit version of the application exists.
Original share library path:
LD_LIBRARY_PATH : /CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mdl/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mmsim/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/inca/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/dfII/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/64bit/SuSE:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/SuSE::/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/lib
DBType UNKNOWN
doOA: 0 doTools: 1 doQT: 0
rm64SharedLibPath sets LD_LIBRARY_PATH=/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mdl/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mmsim/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/inca/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/64bit/SuSE:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/SuSE:.:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/lib
----------------------------------------------------
PATH : /CMC/tools/cadence/ASSURA04.12.014-615_lnx86/tools/bin:/CMC/tools/cadence/ASSURA04.12.014-615_lnx86/tools/assura/bin:/CMC/kits/local/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/dfII/local/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/dfII/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/bin:/CMC/tools/cadence/EDI10.13.003_lnx86/tools/bin:/CMC/tools/cadence/PVE11.10.531_lnx86/bin:/CMC/tools/cadence/PVE11.10.531_lnx86/tools/bin:/CMC/tools/cadence/ETS10.13.003_lnx86/tools/bin:/CMC/tools/cadence/CONFRML10.10.540_lnx86/bin:/CMC/tools/cadence/CONFRML10.10.540_lnx86/tools/cfm/bin:/CMC/tools/cadence/INCISIV10.20.040_lnx86/tools/bin:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/dfII/bin:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/verilog/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/simvisdai/bin:/CMC/tools/cadence/ICC11241USR5_lnx86/tools/iccraft/bin:/CMC/tools/cadence/ICC11241USR5_lnx86/tools/bin:/CMC/tools/mentor/ixl_cal_2010.4_26.16/bin:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/dfII/bin:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/bin:/CMC/tools/cadence/ASSURA04.12.014-615_lnx86/tools/bin:/CMC/tools/cadence/ASSURA04.12.014-615_lnx86/tools/assura/bin:/CMC/kits/local/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/dfII/local/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/dfII/bin:/CMC/tools/cadence/IC06.15.509_lnx86/tools/bin:/CMC/tools/cadence/EDI10.13.003_lnx86/tools/bin:/CMC/tools/cadence/PVE11.10.531_lnx86/bin:/CMC/tools/cadence/PVE11.10.531_lnx86/tools/bin:/CMC/tools/cadence/ETS10.13.003_lnx86/tools/bin:/CMC/tools/cadence/CONFRML10.10.540_lnx86/bin:/CMC/tools/cadence/CONFRML10.10.540_lnx86/tools/cfm/bin:/CMC/tools/cadence/INCISIV10.20.040_lnx86/tools/bin:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/dfII/bin:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/bin:/CMC/tools/synopsys/syn_vD-2010.03-SP4/bin:/CMC/tools/synopsys/syn_vD-2010.03-SP4/linux/syn/bin:/CMC/tools/synopsys/syn_vD-2010.03-SP4:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/verilog/bin:/CMC/tools/cadence/IUS08.20.024_lnx86/tools/simvisdai/bin:/CMC/tools/cadence/ICC11241USR5_lnx86/tools/iccraft/bin:/CMC/tools/cadence/ICC11241USR5_lnx86/tools/bin:/CMC/tools/mentor/ixl_cal_2010.4_26.16/bin:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/dfII/bin:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/bin:/usr/lib/qt-3.3/bin:/usr/kerberos/bin:/usr/local/bin:/bin:/usr/bin:/usr/bin:/local/bin:./:/usr/bin:/local/bin:./
LD_LIBRARY_PATH : /CMC/tools/cadence/MMSIM11.10.366_lnx86/tools/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mdl/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/mmsim/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/inca/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/lib:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/64bit/SuSE:/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/lib/SuSE:.:/CMC/tools/cadence/MMSIM_07.20.109_lnx86/tools/lib
CDS_AUTO_64BIT : NULL
Launching "/CMC/tools/cadence/MMSIM11.10.366_lnx86/tools.lnx86/spectre/bin/32bit/spectre -W"
----------------------------------------
sub-version 11.1.0.366.isr7
I think I am using the 32-bit OS on the server side of my department. But we have 64-bit OS server side as well. So I can tell you sugget me try the same simulation on 64-bit OS. I should have no problem, right?

Thanks,
Alex
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.