Stats

  • Locked Locked
  • Replies 5
  • Subscribers 126
  • Views 17454
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Problem in simulating a circuit with spectre

pdatta

Hi

I am new with linux and cadence. So, the problem I am facing may be a very simple one. But I couldn't find any solution in google and hence, I'm posting. I installed Cadence custom IC 6.15 and MMSIM 12 using iscape in ubuntu 12.04 32 bit OS.Then I installed NCSU freepdk45. Everything seem to work fine. When I run virtuoso, no error or warning in the cds.log file.

But problem occurs when I try to simulate a circuit. I tried to simulate with spectre (I don't have license for hspice). In doing the simulation I did the following things:

1. Initialize the spectre (simulation run directory: spectre.runl).

2. Lunch ADE L, choose simulator/directory/host

3. define model card path, set the stimuli 

4. choose the analysis,  select outputs to be plotted on schematic

5. then choose netlist and run.

When all of these are done I get an error message in the cds.log stating:

ERROR (ADE-3036): Errors encountered during simulation. The simulator run log has not been generated.

        Possible cause could be an invalid command line option for the version of the simulator

        you are running. Choose Setup->Environment and verify that the command line options

        specified in the userCmdLineOption field are supported for the simulator.

        Alternatively, run the simulator standalone using the runSimulation file in the netlist

        directory to know the exact cause of the error. 

So, if you please help me solving this problem, I would really appreciate it.

Palash Datta 

Parents

  • Thanks Andrew for your help. And I m sorry, I m new in this forum.

    I post my question here because I have the same case and problem in this post. I installed cadence IC 6.15 Base, only (without Hotfix), with MMSIM 12.10 in ubunto 12.04 (32bits). And, in the simulation of my circuit, I got the same message error :

    ERROR (ADE-3036): Errors encountered during simulation. The simulator run log has not been generated. Possible cause could be an invalid command line option for the version of the simulator you are running. Choose Setup->Environment and verify that the command line options specified in the userCmdLineOption field are supported for the simulator. Alternatively, run the simulator standalone using the runSimulation file in the netlist directory to know the exact cause of the error.

    When I run "runSimilation" in the netlist directory, I get this message:

    cds_root: cds_root: cannot execute [Erreur de format pour exec()]
    FATAL: Unable to find the Cadence software in your $PATH.

    After readinf your reply, I think that the problem is in my installation (I installed the Base instead Hotfix). Please, what s the supported system (OS) for cadence virtuso?

Reply

  • Thanks Andrew for your help. And I m sorry, I m new in this forum.

    I post my question here because I have the same case and problem in this post. I installed cadence IC 6.15 Base, only (without Hotfix), with MMSIM 12.10 in ubunto 12.04 (32bits). And, in the simulation of my circuit, I got the same message error :

    ERROR (ADE-3036): Errors encountered during simulation. The simulator run log has not been generated. Possible cause could be an invalid command line option for the version of the simulator you are running. Choose Setup->Environment and verify that the command line options specified in the userCmdLineOption field are supported for the simulator. Alternatively, run the simulator standalone using the runSimulation file in the netlist directory to know the exact cause of the error.

    When I run "runSimilation" in the netlist directory, I get this message:

    cds_root: cds_root: cannot execute [Erreur de format pour exec()]
    FATAL: Unable to find the Cadence software in your $PATH.

    After readinf your reply, I think that the problem is in my installation (I installed the Base instead Hotfix). Please, what s the supported system (OS) for cadence virtuso?

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.