Stats

  • Locked Locked
  • Replies 5
  • Subscribers 126
  • Views 16396
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Run ADE XL without netlisting each time

Nicusor

Hello,

I am using a process file in witch are defined models for typical and mismatch with different names, for example nch and nch_mat. The problem is than when I'm trying to do a Monte Carlo simulation, i need to modify manually the netlist and replace nch with nch_mat, in our example, and when I press run in ADE XL it generates a new netlist and it doesn't take into account that I modified the model names. Is there a way in I can run ADE XL without netlisting each time and use the modified netlist? Thank you for your help.

 Regards,

Nicusor 

Parents

  • Thank you for your quick response. It works like a charm.

    What you said is correct, but I don't have different devices for nominal and mismatch, and  even with the mismatch library loaded the netlist is the same. You saved me from a lot of pain.

    Thanks again, 

    Nicusor 

Reply

  • Thank you for your quick response. It works like a charm.

    What you said is correct, but I don't have different devices for nominal and mismatch, and  even with the mismatch library loaded the netlist is the same. You saved me from a lot of pain.

    Thanks again, 

    Nicusor 

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.