Stats

  • Locked Locked
  • Replies 11
  • Subscribers 125
  • Views 15932
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

can't plot waveform while simulating in cadence virtuoso via spectre

leangineer
Hello!

I can't plot waveform while simulating in cadence virtuoso IC 6.1.5 via spectre.

When I initiate Netlist and Run (green button), these are the results:

Delete psf data in /home/eda/simulation/R_div/spectre/schematic/psf.
generate netlist...
Begin Incremental Netlisting Apr 6 23:23:36 2014
End netlisting Apr 6 23:23:36 2014

The netlist is up to date.
Time taken to compare the design with netlist: 0.0s
...successful.
compose simulator input file...
...successful.
start simulator if needed...
...successful.
simulate...
INFO (ADE-3071): Simulation completed successfully.
reading simulation data...
...successful.
net /in selected but not highlighted
net /out selected but not highlighted

---Any solutions? Thank you!
Parents
  • leangineer
    Hello, Tom! Thanks for the reply.

    Below is the code for my generated netlist:

    // Generated for: spectre
    // Generated on: Apr  8 19:49:17 2014
    // Design library name: Lean_1
    // Design cell name: R_div
    // Design view name: schematic
    simulator lang=spectre
    global 0

    // Library name: Lean_1
    // Cell name: R_div
    // View name: schematic
    R1 (in out) resistor r=10K m=1
    R0 (out 0) resistor r=10K m=1
    V1 (in 0) vsource type=dc dc=1
    simulatorOptions options reltol=1e-3 vabstol=1e-6 iabstol=1e-12 temp=27 \
        tnom=27 scalem=1.0 scale=1.0 gmin=1e-12 rforce=1 maxnotes=5 maxwarns=5 \
        digits=5 cols=80 pivrel=1e-3 sensfile="../psf/sens.output" \
        checklimitdest=psf
    tran tran stop=1 write="spectre.ic" writefinal="spectre.fc" \
        annotate=status maxiters=5
    finalTimeOP info what=oppoint where=rawfile
    modelParameter info what=models where=rawfile
    element info what=inst where=rawfile
    outputParameter info what=output where=rawfile
    designParamVals info what=parameters where=rawfile
    primitives info what=primitives where=rawfile
    subckts info what=subckts  where=rawfile
    save in out
    saveOptions options save=allpub

    --My setting for Select signals to output (save) = allpub

    Thanks in advance
Reply
  • leangineer
    Hello, Tom! Thanks for the reply.

    Below is the code for my generated netlist:

    // Generated for: spectre
    // Generated on: Apr  8 19:49:17 2014
    // Design library name: Lean_1
    // Design cell name: R_div
    // Design view name: schematic
    simulator lang=spectre
    global 0

    // Library name: Lean_1
    // Cell name: R_div
    // View name: schematic
    R1 (in out) resistor r=10K m=1
    R0 (out 0) resistor r=10K m=1
    V1 (in 0) vsource type=dc dc=1
    simulatorOptions options reltol=1e-3 vabstol=1e-6 iabstol=1e-12 temp=27 \
        tnom=27 scalem=1.0 scale=1.0 gmin=1e-12 rforce=1 maxnotes=5 maxwarns=5 \
        digits=5 cols=80 pivrel=1e-3 sensfile="../psf/sens.output" \
        checklimitdest=psf
    tran tran stop=1 write="spectre.ic" writefinal="spectre.fc" \
        annotate=status maxiters=5
    finalTimeOP info what=oppoint where=rawfile
    modelParameter info what=models where=rawfile
    element info what=inst where=rawfile
    outputParameter info what=output where=rawfile
    designParamVals info what=parameters where=rawfile
    primitives info what=primitives where=rawfile
    subckts info what=subckts  where=rawfile
    save in out
    saveOptions options save=allpub

    --My setting for Select signals to output (save) = allpub

    Thanks in advance
Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.