Stats

  • Locked Locked
  • Replies 11
  • Subscribers 125
  • Views 15932
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

can't plot waveform while simulating in cadence virtuoso via spectre

leangineer
Hello!

I can't plot waveform while simulating in cadence virtuoso IC 6.1.5 via spectre.

When I initiate Netlist and Run (green button), these are the results:

Delete psf data in /home/eda/simulation/R_div/spectre/schematic/psf.
generate netlist...
Begin Incremental Netlisting Apr 6 23:23:36 2014
End netlisting Apr 6 23:23:36 2014

The netlist is up to date.
Time taken to compare the design with netlist: 0.0s
...successful.
compose simulator input file...
...successful.
start simulator if needed...
...successful.
simulate...
INFO (ADE-3071): Simulation completed successfully.
reading simulation data...
...successful.
net /in selected but not highlighted
net /out selected but not highlighted

---Any solutions? Thank you!
Parents
  • Tom Volden

    As Andrew mentioned, a screen shot of what you are seeing might be helpful.

    There is nothing wrong in the netlist.  I was able to run it in a stand alone spectre session and plot the in and out signals from the results browser.  Note that invoking the results browser will not cause an addional window to appear.  The Results Browser in ViVA is implemented as an assistant which will be docked in the lower left corner of the waveform window (see attached image).

    Regards,

    TOM

Reply
  • Tom Volden

    As Andrew mentioned, a screen shot of what you are seeing might be helpful.

    There is nothing wrong in the netlist.  I was able to run it in a stand alone spectre session and plot the in and out signals from the results browser.  Note that invoking the results browser will not cause an addional window to appear.  The Results Browser in ViVA is implemented as an assistant which will be docked in the lower left corner of the waveform window (see attached image).

    Regards,

    TOM

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.