Stats

Locked Locked
Replies 3
Subscribers 125
Views 17151
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Ocean script plot function

Hi All

I am facing a problem in plotting a bus , I am using ocean script to run simulation . when i use function plot CIW gives me error it cann't plot the whole object

I am using cadence 6.1.5

Thanks

Parents

ahmed osama over 11 years ago

this the error
spectre completes with 1 error, 0 warnings, and 0 notices.
Cannot start up spectre.
WARNING (OCN-6040): The specified directory does not exist, or the directory does not contain valid PSF results.
        Ensure that the path to the directory is correct and the directory has a logFile and PSF result files.
WARNING (OCN-6040): The specified directory does not exist, or the directory does not contain valid PSF results.
        Ensure that the path to the directory is correct and the directory has a logFile and PSF result files.
WARNING (OCN-6034): You need to specify what results you want to look at before using this command.
        You can do this with the openResults() command. For more information type,
        ocnHelp('openResults) in the Command Interface Window (CIW).
WARNING (OCN-6034): You need to specify what results you want to look at before using this command.
        You can do this with the openResults() command. For more information type,
        ocnHelp('openResults) in the Command Interface Window (CIW).
Loading viva.cxt
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/Equal")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/B_larger")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/A_larger")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/B<1>")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/B<0>")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/A<1>")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/A<0>")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.

######################################

This is the script i use
simulator( 'spectre )
design(    "/home/ososanny/simulation/compartor_n_test_bit/spectre/schematic/netlist/netlist")
resultsDir( "/home/ososanny/simulation/compartor_n_test_bit/spectre/schematic" )
modelFile(
    '("/home/ososanny/Desktop/cadence_work/gpdk090_v3.9/libs.oa22/gpdk090/../../models/spectre/gpdk090.scs" "NN")
)
stimulusFile( ?xlate nil
    "/home/ososanny/Desktop/cadence_work/compartor.scs")
analysis('tran ?stop "30n" ?start "0" ?outputstart "0"
        ?step "10p" ?maxstep "10p" )
envOption(
    'analysisOrder list("tran")
)
temp( 27 )
run()
openResults( "/home/ososanny/simulation/compartor_n_test_bit/spectre/schematic/psf" )
selectResult( 'tran )
selectResult( 'tran )
plot(getData("/Equal") getData("/B_larger") getData("/A_larger") getData("/B<1>") getData("/B<0>") getData("/A<1>") getData("/A<0>") )
Cancel
Vote Up 0 Vote Down

Cancel

Reply

ahmed osama over 11 years ago

this the error
spectre completes with 1 error, 0 warnings, and 0 notices.
Cannot start up spectre.
WARNING (OCN-6040): The specified directory does not exist, or the directory does not contain valid PSF results.
        Ensure that the path to the directory is correct and the directory has a logFile and PSF result files.
WARNING (OCN-6040): The specified directory does not exist, or the directory does not contain valid PSF results.
        Ensure that the path to the directory is correct and the directory has a logFile and PSF result files.
WARNING (OCN-6034): You need to specify what results you want to look at before using this command.
        You can do this with the openResults() command. For more information type,
        ocnHelp('openResults) in the Command Interface Window (CIW).
WARNING (OCN-6034): You need to specify what results you want to look at before using this command.
        You can do this with the openResults() command. For more information type,
        ocnHelp('openResults) in the Command Interface Window (CIW).
Loading viva.cxt
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/Equal")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/B_larger")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/A_larger")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/B<1>")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/B<0>")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/A<1>")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.
          name: "getData(\"/Equal\")"
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
WARNING (OCN-6041): You must do openResults() and selectResults() before using this command.
        Make sure your openResults() and selectResults() commands worked. Use ocnHelp('openResults)
        and ocnHelp('selectResults) for more information.
ERROR (WIA-1006): Unable to plot expression <getData("/A<0>")>
           because it does not evaluate to an object that can be plotted, like a waveform or
           parametric wave. See the Visualization & Analysis Tool documentation for information
           about the types of objects that can be plotted in Visualization & Analysis Tool. Only
           the expressions that evaluate to those objects can be plotted.
*Warning* Wave1 is not a waveform object that can be displayed and
          will be DELETED automatically.

######################################

This is the script i use
simulator( 'spectre )
design(    "/home/ososanny/simulation/compartor_n_test_bit/spectre/schematic/netlist/netlist")
resultsDir( "/home/ososanny/simulation/compartor_n_test_bit/spectre/schematic" )
modelFile(
    '("/home/ososanny/Desktop/cadence_work/gpdk090_v3.9/libs.oa22/gpdk090/../../models/spectre/gpdk090.scs" "NN")
)
stimulusFile( ?xlate nil
    "/home/ososanny/Desktop/cadence_work/compartor.scs")
analysis('tran ?stop "30n" ?start "0" ?outputstart "0"
        ?step "10p" ?maxstep "10p" )
envOption(
    'analysisOrder list("tran")
)
temp( 27 )
run()
openResults( "/home/ososanny/simulation/compartor_n_test_bit/spectre/schematic/psf" )
selectResult( 'tran )
selectResult( 'tran )
plot(getData("/Equal") getData("/B_larger") getData("/A_larger") getData("/B<1>") getData("/B<0>") getData("/A<1>") getData("/A<0>") )
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.