Stats

  • Locked Locked
  • Replies 4
  • Subscribers 125
  • Views 14521
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Virtuoso ADE Dynamic Parameter Clarification

jjang3

Hello everyone,

 

I just have a quick question on certain aspect of dynamic paramter on Virtuoso ADE. As you can see from the image, why does temperature reset to 27C after changing into 90C from 1900ns? 

 

 

Here is another image with temperature setting for dynamic paramter:

http://imgur.com/Me34XqT

 

Thank you very much for any replies,

Sincerely,

jjang3 

Parents

  • Something is a bit odd - because it has a message about initial condition solution time - near the end of the transient. So it looks as if it is doing more than one transient or something similar.

    Please can you post:

    1. The analysis statements and options at the bottom of the input.scs (Simulation->Netlist->Display) - everything from the bottom of the circuit to the end of the file. Please post the text rather than a picture (text is searchable, copy-and-pastable).
    2. Which subversion of spectre you're using (that will be at the top  of the spectre log file)

    Regards,

    Andrew.

Reply

  • Something is a bit odd - because it has a message about initial condition solution time - near the end of the transient. So it looks as if it is doing more than one transient or something similar.

    Please can you post:

    1. The analysis statements and options at the bottom of the input.scs (Simulation->Netlist->Display) - everything from the bottom of the circuit to the end of the file. Please post the text rather than a picture (text is searchable, copy-and-pastable).
    2. Which subversion of spectre you're using (that will be at the top  of the spectre log file)

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.