Stats

  • Locked Locked
  • Replies 6
  • Subscribers 126
  • Views 18384
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Latest MMSIM Version for IC5141

Xegotronix

Hi,

What is the latest MMSIM version compatible with IC5141?

We have MMSIM313 installed.

The path for MMSIM is in front of the IC, but the spectre is still checked out of the IC path.

It does not recognize a lot of parameters and functions in the PDK models. Even the vbit source from the analogLib is not recognized.

Thank You,

Yaser

Parents
  • Andrew Beckett

    On my RHEL6.5 machine, the 32 bit and 64 bit versions came from these RPMs:

    UNIX> rpm -q -f /lib/libreadline.so.5
    compat-readline5-5.2-17.1.el6.i686
    UNIX> rpm -q -f /lib64/libreadline.so.5
    compat-readline5-5.2-17.1.el6.x86_64

    Regards,

    Andrew.

  • Mehdi Nasr
    in reply to Andrew Beckett

    Hi Andrew, 

    I do have the same problem when I am using the veriloga model in my design and the cadence gives me the following error: 

       "ERROR (VACOMP-1008): Cannot compile ahdlcmi module library. Check the log file input.ahdlSimDB/6280_artist_ahdlLib_decimator_veriloga_veriloga.va.decimator.ahdlcmi/Linux3.10.0-862.11.6.el7.x86_64+gcc/../ahdlcmi.out for details. If the compiler ran out of memory, use 'setenv CDS_CMI_COMPLEVEL 0', and try again. If the reason for the failure was a syntax error, contact your Cadence Customer Support representative with the netlist, log files, behavioral model files, and any other information that can help identify the problem.
        ERROR (SFE-91): Error when elaborating the instance decimator. Simulation should be terminated."

  • Andrew Beckett
    in reply to Mehdi Nasr

    Please read Guidelines for the Custom IC Design Forum as you've posted on the end of a 4-year old thread, with no information about the version of Spectre that you're using. Did you look at the file ahdlcmi.out which gave more information on the problem (it suggests you check out the log file in the message). Is the model from a Cadence library (it suggests so from the name above, but if so, which model precisely were you using?). I suggest you start a new thread with this additional information.

    Andrew

Reply
  • Andrew Beckett
    in reply to Mehdi Nasr

    Please read Guidelines for the Custom IC Design Forum as you've posted on the end of a 4-year old thread, with no information about the version of Spectre that you're using. Did you look at the file ahdlcmi.out which gave more information on the problem (it suggests you check out the log file in the message). Is the model from a Cadence library (it suggests so from the name above, but if so, which model precisely were you using?). I suggest you start a new thread with this additional information.

    Andrew

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.