Model Card

I have created a model card , but seems like ADE cannot plot output after simulation.Below is my ADE log:

Cadence (R) Virtuoso (R) Spectre (R) Circuit Simulator
Version 7.0.1.179.isr16 -- 15 Jan 2009
Copyright (C) 1989-2007 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, Virtuoso and Spectre are registered trademarks of Cadence Design Systems, Inc. All others are the property of their respective holders.

Protected by U.S. Patents: 5,610,847; 5,790,436; 5,812,431; 5,859,785; 5,949,992; 5,987,238; 6,088,523; 6,101,323; 6,151,698; 6,181,754; 6,260,176; 6,278,964; 6,349,272; 6,374,390; 6,493,849; 6,504,885; 6,618,837; 6,636,839; 6,778,025; 6,832,358; 6,851,097; 6,928,626; 7,024,652; 7,035,782; 7,085,700; 7,143,021.

Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA Security, Inc.

Simulating `input.scs' on [machine] at 5:16:35 PM, Wed Feb 18, 2015 (process id: 4606).
Command line:
    /apps/cadence/MMSIM0701179/tools.lnx86/spectre/bin/32bit/spectre  \
        input.scs +escchars +log ../psf/spectre.out +inter=mpsc  \
        +mpssession=spectre12_31805_2 -format sst2 -raw ../psf  \
        +lqtimeout 900 -maxw 5 -maxn 5
spectre pid = 4606

Loading /apps/cadence/MMSIM0701179/tools.lnx86/cmi/lib/5.0/libinfineon_sh.so ...
Loading /apps/cadence/MMSIM0701179/tools.lnx86/cmi/lib/5.0/libphilips_sh.so ...
Loading /apps/cadence/MMSIM0701179/tools.lnx86/cmi/lib/5.0/libsparam_sh.so ...
Loading /apps/cadence/MMSIM0701179/tools.lnx86/cmi/lib/5.0/libstmodels_sh.so ...
Using new Spectre Parser.

Notice from spectre during topology check.
    Only one connection to node `net4'.
Warning from spectre during initial setup.
    WARNING (SPECTRE-8281): `M0D' is not a node nor an instance name.
    WARNING (SPECTRE-8286): Ignoring invalid item `M0D' in save statement.


Circuit inventory:
              nodes 2
          capacitor 1     
            vsource 2     

Entering remote command mode using MPSC service (spectre, ipi, v0.0, spectre12_31805_2, ).

**************************************
DC Analysis `dc': V1:dc = (0 V -> 1 V)
**************************************
Important parameter values:
    reltol = 1e-03
    abstol(I) = 1 pA
    abstol(V) = 1 uV
    temp = 27 C
    tnom = 27 C
    tempeffects = all
    gmin = 1 pS
    dc: dc = 30 mV          (3 %), step = 10 mV           (1 %)
    dc: dc = 80 mV          (8 %), step = 10 mV           (1 %)
    dc: dc = 130 mV        (13 %), step = 10 mV           (1 %)
    dc: dc = 180 mV        (18 %), step = 10 mV           (1 %)
    dc: dc = 230 mV        (23 %), step = 10 mV           (1 %)
    dc: dc = 280 mV        (28 %), step = 10 mV           (1 %)
    dc: dc = 330 mV        (33 %), step = 10 mV           (1 %)
    dc: dc = 380 mV        (38 %), step = 10 mV           (1 %)
    dc: dc = 430 mV        (43 %), step = 10 mV           (1 %)
    dc: dc = 480 mV        (48 %), step = 10 mV           (1 %)
    dc: dc = 530 mV        (53 %), step = 10 mV           (1 %)
    dc: dc = 580 mV        (58 %), step = 10 mV           (1 %)
    dc: dc = 630 mV        (63 %), step = 10 mV           (1 %)
    dc: dc = 680 mV        (68 %), step = 10 mV           (1 %)
    dc: dc = 730 mV        (73 %), step = 10 mV           (1 %)
    dc: dc = 780 mV        (78 %), step = 10 mV           (1 %)
    dc: dc = 830 mV        (83 %), step = 10 mV           (1 %)
    dc: dc = 880 mV        (88 %), step = 10 mV           (1 %)
    dc: dc = 930 mV        (93 %), step = 10 mV           (1 %)
    dc: dc = 980 mV        (98 %), step = 10 mV           (1 %)
Total time required for dc analysis `dc' was 10 ms.

modelParameter: writing model parameter values to rawfile.
element: writing instance parameter values to rawfile.
outputParameter: writing output parameter values to rawfile.
designParamVals: writing netlist parameters to rawfile.
primitives: writing primitives to rawfile.
subckts: writing subcircuits to rawfile.

.Model Card created:

FinFET.scs (this is not a FinFET, only the filename is named "FinFET")

simulator lang=spectre
library FinFET

section tt
include "45nm.scs" section=45
endsection tt

endlibrary FinFET

45nm.scs

section 45

subckt nmos45 (d g s b);
//inline subckt nmos45 (d g s b);
model nch bsim4

//parameters
//+l=45e-9
//+w=120e-9
////+nf=1
//+factor=1
//+lef=l*factor
////+wef=n/nf*factor
//+wef=n*factor

//Technology parameters

+level = 54
+version = 4.0             binunit = 1               paramchk= 1               mobmod  = 0             
+capmod  = 2               igcmod  = 1               igbmod  = 1               geomod  = 1             
+diomod  = 1               rdsmod  = 0               rbodymod= 1               rgatemod= 1             
+permod  = 1               acnqsmod= 0               trnqsmod= 0             

+tref    = 27              toxe    = 1.8e-009        toxp    = 1.5e-009        toxm    = 1.8e-009      
+dtox    = 3e-010          epsrox  = 3.9             wint    = 5e-009          lint    = 0             
+ll      = 0               wl      = 0               lln     = 1               wln     = 1             
+lw      = 0               ww      = 0               lwn     = 1               wwn     = 1             
+lwl     = 0               wwl     = 0               xpart   = 0               toxref  = 1.8e-009      

+vth0    = 0.62261         k1      = 0.4             k2      = 0               k3      = 0             
+k3b     = 0               w0      = 2.5e-006        dvt0    = 1               dvt1    = 2             
+dvt2    = 0               dvt0w   = 0               dvt1w   = 0               dvt2w   = 0             
+dsub    = 0.1             minv    = 0.05            voffl   = 0               dvtp0   = 1e-010        
+dvtp1   = 0.1             lpe0    = 0               lpeb    = 0               xj      = 1.4e-008      
+ngate   = 1e+023          ndep    = 3.24e+018       nsd     = 2e+020          phin    = 0             
+cdsc    = 0               cdscb   = 0               cdscd   = 0               cit     = 0             
+voff    = -0.13           nfactor = 1.6             eta0    = 0.0125          etab    = 0             
+vfb     = -0.55           u0      = 0.049           ua      = 6e-010          ub      = 1.2e-018      
+uc      = 0               vsat    = 130000          a0      = 1               ags     = 0             
+a1      = 0               a2      = 1               b0      = 0               b1      = 0             
+keta    = 0.04            dwg     = 0               dwb     = 0               pclm    = 0.02          
+pdiblc1 = 0.001           pdiblc2 = 0.001           pdiblcb = -0.005          drout   = 0.5           
+pvag    = 1e-020          delta   = 0.01            pscbe1  = 8.14e+008       pscbe2  = 1e-007        
+fprout  = 0.2             pdits   = 0.08            pditsd  = 0.23            pditsl  = 2300000       
+rsh     = 5               rdsw    = 210             rsw     = 80              rdw     = 80            
+rdswmin = 0               rdwmin  = 0               rswmin  = 0               prwg    = 0             
+prwb    = 0               wr      = 1               alpha0  = 0.074           alpha1  = 0.005         
+beta0   = 30              agidl   = 0.0002          bgidl   = 2.1e+009        cgidl   = 0.0002        
+egidl   = 0.8             aigbacc = 0.012           bigbacc = 0.0028          cigbacc = 0.002         
+nigbacc = 1               aigbinv = 0.014           bigbinv = 0.004           cigbinv = 0.004         
+eigbinv = 1.1             nigbinv = 3               aigc    = 0.015211        bigc    = 0.0027432     
+cigc    = 0.002           aigsd   = 0.015211        bigsd   = 0.0027432       cigsd   = 0.002         
+nigc    = 1               poxedge = 1               pigcd   = 1               ntox    = 1             
+xrcrg1  = 12              xrcrg2  = 5             

+cgso    = 1.1e-010        cgdo    = 1.1e-010        cgbo    = 2.56e-011       cgdl    = 2.653e-010    
+cgsl    = 2.653e-010      ckappas = 0.03            ckappad = 0.03            acde    = 1             
+moin    = 15              noff    = 0.9             voffcv  = 0.02          

+kt1     = -0.11           kt1l    = 0               kt2     = 0.022           ute     = -1.5          
+ua1     = 4.31e-009       ub1     = 7.61e-018       uc1     = -5.6e-011       prt     = 0             
+at      = 33000         

+fnoimod = 1               tnoimod = 0             

+jss     = 0.0001          jsws    = 1e-011          jswgs   = 1e-010          njs     = 1             
+ijthsfwd= 0.01            ijthsrev= 0.001           bvs     = 10              xjbvs   = 1             
+jsd     = 0.0001          jswd    = 1e-011          jswgd   = 1e-010          njd     = 1             
+ijthdfwd= 0.01            ijthdrev= 0.001           bvd     = 10              xjbvd   = 1             
+pbs     = 1               cjs     = 0.0005          mjs     = 0.5             pbsws   = 1             
+cjsws   = 5e-010          mjsws   = 0.33            pbswgs  = 1               cjswgs  = 3e-010        
+mjswgs  = 0.33            pbd     = 1               cjd     = 0.0005          mjd     = 0.5           
+pbswd   = 1               cjswd   = 5e-010          mjswd   = 0.33            pbswgd  = 1             
+cjswgd  = 5e-010          mjswgd  = 0.33            tpb     = 0.005           tcj     = 0.001         
+tpbsw   = 0.005           tcjsw   = 0.001           tpbswg  = 0.005           tcjswg  = 0.001         
+xtis    = 3               xtid    = 3             

+dmcg    = 0               dmci    = 0               dmdg    = 0               dmcgt   = 0             
+dwj     = 0               xgw     = 0               xgl     = 0             

+rshg    = 0.4             gbmin   = 1e-010          rbpb    = 5               rbpd    = 15            
+rbps    = 15              rbdb    = 15              rbsb    = 15              ngcon   = 1             

ends nmos45

endsection 45

This is what my CDF and library decleration looks like:

When I run ADE simulation, all I get is a blank waveform window.Am I doing something wrong ?

Thanks.