Stats

  • Locked Locked
  • Replies 18
  • Subscribers 126
  • Views 17568
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

neural signal

pratibhads2805

hi

The input to my circuit is neural signal, i want to ask that how to get neural signal input in cadence.

Parents

  • hello sir,

    i need some information regarding the analoglib components and how to use them.

    1)switch

    2)sp1t switch

    3)sp2t switch

    i've also a query for the analoglib switch , i want to control this switch using vpulse. i am giving vclose=1.5V and vopen = 0V, open resistance and closed resistance are set to the default values, but the switch is closed for all the time. please tell me how to use it properly. Also tell me how to control the opening and closing of sp2t switch.

    thank you sir in advance.

Reply

  • hello sir,

    i need some information regarding the analoglib components and how to use them.

    1)switch

    2)sp1t switch

    3)sp2t switch

    i've also a query for the analoglib switch , i want to control this switch using vpulse. i am giving vclose=1.5V and vopen = 0V, open resistance and closed resistance are set to the default values, but the switch is closed for all the time. please tell me how to use it properly. Also tell me how to control the opening and closing of sp2t switch.

    thank you sir in advance.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.