Stats

Locked Locked
Replies 4
Subscribers 126
Views 22477
Members are here 0

This discussion has been locked.

You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Failed to build VDB. Cannot submit DRC Run

V4vlsi over 10 years ago

Hi,

while doing simple DRC Run of an simple inverter Layout. I am getting the following error.

Loading tech rule set file : /mnt/Newhdd/Cadence_tools/UMC180/RuleDecks/Assura/techRuleSets

Assura DRC: State saved "Last"

Loading tech rule set file : /mnt/Newhdd/Cadence_tools/UMC180/RuleDecks/Assura/techRuleSets

Compiling rules...

*Error* load: can't access file - "/Newhdd/PDKS/UMC180/RuleDecks/Assura/DRC/G-DF-LOGIC18-1.8V-3.3V-1P6M-Assura-drc-memory.rul"

Errors exist in the rules file '/mnt/Newhdd/Cadence_tools/UMC180/RuleDecks/Assura/./DRC/G-DF-MIXEDMODE_RFCMOS18-1.8V-3.3V-1P6M-MMC-Assura-drc-2.11-p1.rul'.

*WARNING* Failed to build VDB. Cannot submit DRC Run.

Assura DRC: State loaded "Last"

I am using Cadence Virtuoso version IC6.1.5.500.11. and DRC engine ASSURA 4.1_USR2HF2. Is there any compatibility issue thit the version of virtuoso and ASSURA.?

PLZ help. Thanks in advance.

Parents

Andrew Beckett over 10 years ago

I'm not sure why you think it's a compatibility issue? The error message looks pretty clear to me - something is referencing a file, and it can't find that file. Since the file in question appears to be part of the rule decks, it suggests a problem with the installation of the rule decks, not the tool.

Check to see if the path in question exists - maybe it is a permission problem? Then look at the other files to see where this is referenced - maybe there is a switch you need to set to avoid this. Also check whether it has been installed correctly. Finally, check with the providers of the rule decks...

Regards,

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Reply

Andrew Beckett over 10 years ago

I'm not sure why you think it's a compatibility issue? The error message looks pretty clear to me - something is referencing a file, and it can't find that file. Since the file in question appears to be part of the rule decks, it suggests a problem with the installation of the rule decks, not the tool.

Check to see if the path in question exists - maybe it is a permission problem? Then look at the other files to see where this is referenced - maybe there is a switch you need to set to avoid this. Also check whether it has been installed correctly. Finally, check with the providers of the rule decks...

Regards,

Andrew.
Cancel
Vote Up 0 Vote Down

Cancel

Children

No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.