Stats

  • Locked Locked
  • Replies 1
  • Subscribers 127
  • Views 1915
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

QRC Extraction - Assura

Paolo Minotti

Hi all,

I am trying to extract the parasitics of my layout.

I get an error message I cannot understand the source.

Here's the log:

----

Cadence Extraction QRC - 64-bit Parasitic Extractor - Version 9.1.3-p003


Thu Jun 24 10:49:17 PDT 2010


----------------------------------------------------------------------------------------------------------


Copyright 2010 Cadence Design Systems, Inc.








INFO (EXTQRCXOPT-249) : For Assura inputs, if the "output_setup -directory_name" option was not
specified, it is automatically set to the input directory.

INFO (LBRCXU-108): Starting


/usr/local/cadence//ASSURA_4.1OA-614/tools/assura/bin/rcxToDfII /media/storage-3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS/__qrc.rcx_cmd -t -f

/media/storage-3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS/extview.tmp -w /media/storage-3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS -cdslib

/media/storage-3/AMSWorkArea/cds.lib


Virtuoso Framework License (111) was checked out successfully. Total checkout time was 0.07s.


@(#)$CDS: rcxToDfII_64 version av4.1:Production:dfII6.1.4-64b:IC6.1.4-64b.485 07/07/2010 03:51 (sjfql241) $


sub-version 4.1_USR1_HF10, integ signature 2010-07-07-0307




run on pcsandlab3-2.elet.polimi.it from /usr/local/cadence/ASSURA_4.1OA-614/tools.lnx86/assura/bin/64bit/rcxToDfII on Fri Jul 24 15:41:43 2015





Loading tech rule set file : /media/storage-3/AMSC35B4C3/assura/c35b4/c35b4c3/techRuleSets


Loading all available p-cell functions


AMS_DB set to cds


No mx check


*WARNING* (DB-270211): dbOpenCellViewByType: Failed to open cellview (esdpd18 auLvs) from lib (ESDLIB) in 'r' mode because cellview does not exist, or

cellview type is not recognized by dbOpenCellViewByType.


*WARNING* No library model for device "esdpd18 auLvs ESDLIB".


*WARNING* (DB-270211): dbOpenCellViewByType: Failed to open cellview (esdpd26 auLvs) from lib (ESDLIB) in 'r' mode because cellview does not exist, or

cellview type is not recognized by dbOpenCellViewByType.


*WARNING* No library model for device "esdpd26 auLvs ESDLIB".


*WARNING* (DB-270211): dbOpenCellViewByType: Failed to open cellview (esdpd30 auLvs) from lib (ESDLIB) in 'r' mode because cellview does not exist, or

cellview type is not recognized by dbOpenCellViewByType.


*WARNING* No library model for device "esdpd30 auLvs ESDLIB".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'IOLIB_4M' does not exist


*WARNING* No library model for device "probepad auLvs IOLIB_4M".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'PRIMLIBRF' does not exist


*WARNING* No library model for device "nmosrf auLvs PRIMLIBRF".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'PRIMLIBRF' does not exist


*WARNING* No library model for device "pmosrf auLvs PRIMLIBRF".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'PRIMLIBRF' does not exist


*WARNING* No library model for device "cpolyrf auLvs PRIMLIBRF".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'PRIMLIBRF' does not exist


*WARNING* No library model for device "rpoly2rf auLvs PRIMLIBRF".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'PRIMLIBRF' does not exist


*WARNING* No library model for device "rpolyhrf auLvs PRIMLIBRF".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'SPIRALS_4M' does not exist


*WARNING* No library model for device "SP014S300D auLvs SPIRALS_4M".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'SPIRALS_4M' does not exist


*WARNING* No library model for device "SP020S180D auLvs SPIRALS_4M".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'SPIRALS_4M' does not exist


*WARNING* No library model for device "SP026S200D auLvs SPIRALS_4M".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'SPIRALS_4M' does not exist


*WARNING* No library model for device "SP037S180D auLvs SPIRALS_4M".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'SPIRALS_4M' does not exist


*WARNING* No library model for device "SP047S180D auLvs SPIRALS_4M".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'SPIRALS_4M' does not exist


*WARNING* No library model for device "SP050S155D auLvs SPIRALS_4M".


*WARNING* (DB-270210): dbOpenCellViewByType: library 'SPIRALS_4M' does not exist


*WARNING* No library model for device "SP090S155D auLvs SPIRALS_4M".


INFO (LBRCXU-114): Finished /usr/local/cadence//ASSURA_4.1OA-614/tools/assura/bin/rcxToDfII




INFO (LBRCXU-108): Starting




/usr/local/cadence//ASSURA_4.1OA-614/tools/assura/bin/avRCXxref /media/storage-3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS/__qrc.rcx_cmd -useRunName


@(#)$CDS: avRCXxref_64 version av4.1:Production:dfII6.1.4-64b:IC6.1.4-64b.485 07/07/2010 03:49 (sjfql241) $


sub-version 4.1_USR1_HF10, integ signature 2010-07-07-0307


run on pcsandlab3-2.elet.polimi.it at Fri Jul 24 15:41:43 2015
Reading rsf


INFO (LBRCXU-114): Finished /usr/local/cadence//ASSURA_4.1OA-614/tools/assura/bin/avRCXxref



INFO (LBRCXM-642): Constructing the RCX run script

INFO (LBMISC-215205):
*** Cadence Extraction QRC Techgen -trans VERSION 9.1 Linux 32 bit - (Mon Jun 21

09:44:05 PDT 2010)  ***




INFO (CAPGEN-41199):





Techgen -trans results will be written to directory: /media/storage-3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS



ERROR (LBMISC-215479): at "Techgen -trans": Connect layer 'net_nwell' from lvsfile is declared as stamped layer in p2lvsfile. Please check the p2lvsfile.


INFO (RCXSPIC-27150): The following forked command failed. Contact Cadence Customer Support for assistance.
 
/usr/local/cadence/EXT_9.1/tools.lnx86/extraction/bin/64bit//capgen -techdir /media/storage-3/AMSC35B4C3/assura/c35b4/c35b4/RCX-typical -lvs /media/storage-

3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS.xcn -p2lvs /media/storage-3/AMSC35B4C3/assura/c35b4/c35b4/RCX-typical/qrcTechFile -sd -sw3d -

auto_reorder_off -length_units meters -cap_unit 1.0 -selected_paths_proper -p poly1,capgen_gate,pdiff -no_cap_correction -cap_ground_layer net_psub -dsub

net_nwell,net_psub -lexclude poly2,poly1 -blocking cblock_met2cap_met2,met2cap,met2 -blocking cblock_met1_fox,met1,poly2,poly1,pdiff,fox -blocking

cblock_poly2_poly1,poly2,poly1 -res_blocking rblock_poly1,net_poly1 -res_blocking rblock_poly2,net_poly2 -res_blocking rblock_met1,net_met1 -res_blocking

rblock_met2,net_met2 -res_blocking rblock_met3,net_met3 -res_blocking rblock_met4,net_met4 /media/storage-3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS


Forking:  /usr/local/cadence/EXT_9.1/tools.lnx86/extraction/bin/64bit//capgen -techdir /media/storage-3/AMSC35B4C3/assura/c35b4/c35b4/RCX-typical -lvs

/media/storage-3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS.xcn -p2lvs /media/storage-3/AMSC35B4C3/assura/c35b4/c35b4/RCX-typical/qrcTechFile -sd -sw3d

-auto_reorder_off -length_units meters -cap_unit 1.0 -selected_paths_proper -p poly1,capgen_gate,pdiff -no_cap_correction -cap_ground_layer net_psub -dsub

net_nwell,net_psub -lexclude poly2,poly1 -blocking cblock_met2cap_met2,met2cap,met2 -blocking cblock_met1_fox,met1,poly2,poly1,pdiff,fox -blocking

cblock_poly2_poly1,poly2,poly1 -res_blocking rblock_poly1,net_poly1 -res_blocking rblock_poly2,net_poly2 -res_blocking rblock_met1,net_met1 -res_blocking

rblock_met2,net_met2 -res_blocking rblock_met3,net_met3 -res_blocking rblock_met4,net_met4 /media/storage-3/AMSWorkArea/ASSURA_LVS/0_drive_PADS/0_drive_PADS

ERROR (LBRCXM-644): Bad return status from RCX script generator. 0x100



INFO (LBRCXM-709): *****  QRC terminated abnormally  *****


----

Any idea/suggestion?

Thank you,

Paolo

--

Parents

  • Hi Paolo

    ERROR (LBMISC-215479): at "Techgen -trans": Connect layer 'net_nwell' from lvsfile is declared as stamped layer in p2lvsfile. Please check the p2lvsfile.

    The above error usually means that there is a problem with the layer mapping in the QRC package. It would be good if you can check if there are any updates for the package.  Alternatively, you can try to resolve the problem as follows:

    a. Check "net_nwell" line in layerSetupFile (or layer_setup) in QRC technology directory
    b. If there are keywords such as "stamp=1/2", remove them
    c. Check RCXspiceINIT file for the previous compilation options. Re-compile the package with Techgen using the same options

    By the way, your current QRC is ver9.1.3. It is really quite out-dated. If it is possible, please kindly update to ver15.11.


    Best regards
    Quek

Reply

  • Hi Paolo

    ERROR (LBMISC-215479): at "Techgen -trans": Connect layer 'net_nwell' from lvsfile is declared as stamped layer in p2lvsfile. Please check the p2lvsfile.

    The above error usually means that there is a problem with the layer mapping in the QRC package. It would be good if you can check if there are any updates for the package.  Alternatively, you can try to resolve the problem as follows:

    a. Check "net_nwell" line in layerSetupFile (or layer_setup) in QRC technology directory
    b. If there are keywords such as "stamp=1/2", remove them
    c. Check RCXspiceINIT file for the previous compilation options. Re-compile the package with Techgen using the same options

    By the way, your current QRC is ver9.1.3. It is really quite out-dated. If it is possible, please kindly update to ver15.11.


    Best regards
    Quek

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.