Stats

  • Locked Locked
  • Replies 3
  • Subscribers 125
  • Views 14096
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Vth0 definition in scs file

BaaB

I am designing with library tsmcn65. I am having a problem understanding spectre circuit simulator  scs file. As you can see in the crn65gplus_2d5_lk_v1d0.scs or the image attached below, with a mosfet nch_na there are many Vth0 definitions.

So which one is used for normal simulation? How to choose or define it?
Are there some materials explaining about this?

Note from Moderator - Removed Image as it was sharing TSMC's IP which would have been in violation of your NDA with TSMC.

Parents
  • Andrew Beckett

    It's the w and l as specified in the netlist (so the finger width and length, not total). Essentially it's based on the channel w and l and the rest is handled by the normal multipliers for parallel devices.

    Run <MMSIMinstDir>/tools/bin/cdnshelp and search for "binning". You'll find a section in the Parameter Specification and Modeling Features section of the Virtuoso® Spectre® Circuit Simulator and Accelerated Parallel Simulator User Guide which covers how it works.

    Regards,

    Andrew.

Reply
  • Andrew Beckett

    It's the w and l as specified in the netlist (so the finger width and length, not total). Essentially it's based on the channel w and l and the rest is handled by the normal multipliers for parallel devices.

    Run <MMSIMinstDir>/tools/bin/cdnshelp and search for "binning". You'll find a section in the Parameter Specification and Modeling Features section of the Virtuoso® Spectre® Circuit Simulator and Accelerated Parallel Simulator User Guide which covers how it works.

    Regards,

    Andrew.

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.