Stats

  • Locked Locked
  • Replies 5
  • Subscribers 125
  • Views 16357
  • Members are here 0
This discussion has been locked.
You can no longer post new replies to this discussion. If you have a question you can start a new discussion

Monte Carlo simulation error

vinod joshi

During MC simulation in ADEXL window, we found a pop up window with the following error messages after 10 min, while the 6T SRAM cell was run for 100ns for 2 samples. Please help in this matter.

Error message

ADEXL-1921: failed to start new job after 3 attempts . Possible reasons could be

1. The macnie selected in the current job set up policy is not reachable 

2. The cadence hierarchcy is not detectedd, not installed properly, or not compatible on the machine selected in the current job set up policy.

3. Job start script /home/student/chetna/.temp_student/.cmddir0/runICPR3 is not found in the remote machine.

          Do you want to retry with the current set up? Selecting no will abort the current session. 

Parents
  • vinod joshi

    Dear Andrew,

    Thanks for your prompt response. For your kind information i have append the following information,

    1. IC 6.1.6.500.1

    2. 12.1.0.402.isr5

    3. No, it does not work with single run sweeps and corners.

    4. ADE XL default

    But for your kind information i would like to tell you that it is working using .OCN script.

    Waiting for your response,

    Regards,

    Vinod

Reply
  • vinod joshi

    Dear Andrew,

    Thanks for your prompt response. For your kind information i have append the following information,

    1. IC 6.1.6.500.1

    2. 12.1.0.402.isr5

    3. No, it does not work with single run sweeps and corners.

    4. ADE XL default

    But for your kind information i would like to tell you that it is working using .OCN script.

    Waiting for your response,

    Regards,

    Vinod

Children
No Data

Community Guidelines

The Cadence Design Communities support Cadence users and technologists interacting to exchange ideas, news, technical information, and best practices to solve problems and get the most from Cadence technology. The community is open to everyone, and to provide the most value, we require participants to follow our Community Guidelines that facilitate a quality exchange of ideas and information. By accessing, contributing, using or downloading any materials from the site, you agree to be bound by the full Community Guidelines.